Driver Assistance Systems; Rear Vision Camera (Rvc) - GMC 2017 Canyon Owner's Manual

The speedometer reading can be
displayed in either English or metric
units. See Driver Information Center
(DIC) (Base Level) 0 127 or Driver
Information Center (DIC) (Uplevel)
0 130. The increment value used
depends on the units displayed.
Passing Another Vehicle While
Using Cruise Control
Use the accelerator pedal to
increase the vehicle speed. When
you take your foot off the pedal, the
vehicle will slow down to the
previous set cruise speed. While
pressing the accelerator pedal or
shortly following the release to
override cruise control, briefly
pressing SET will result in cruise
control set to the current vehicle
speed.
Using Cruise Control on Hills
How well the cruise control will work
on hills depends on the vehicle
speed, load, and the steepness of
the hills. When going up steep hills,
you might have to step on the
accelerator pedal to maintain your
speed. When going downhill, you
might have to brake or shift to a
lower gear to keep your speed
down. If the brake pedal is applied,
cruise control will disengage.
Ending Cruise Control
There are four ways to end cruise
control:
Step lightly on the brake pedal.
Press .
Press the clutch pedal for
several seconds or shift the
transmission to N (Neutral).
To turn off cruise control,
press .
Erasing Speed Memory
The cruise control set speed is
erased from memory if
or if the ignition is turned off.
Driving and Operating
Driver Assistance
Systems
Rear Vision
Camera (RVC)
The camera(s) do not display
children, pedestrians, bicyclists,
crossing traffic, animals, or any
other object outside of the
cameras field of view, below the
bumper, or under the vehicle.
Shown distances may be different
from actual distances. Do not
drive or park the vehicle using
only these camera(s). Always
is pressed
check behind and around the
vehicle before driving. Failure to
use proper care may result in
injury, death, or vehicle damage.
If equipped, the RVC system is
designed to help the driver when
backing up by displaying a view of
the area behind the vehicle. When
the key is in ON/RUN and the driver
261
Warning