Basic Style - Pioneer CDJ-2000NXS2 Operating Instructions Manual

Connections
! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
! Refer to the operating instructions for the component to be connected.
! Connect the power cord after all the connections between devices have been completed.
! When using a LAN cable for connection, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable.
! Do not disconnect the LAN cable when music files and/or information are being shared using PRO DJ LINK.

Basic style

Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer.
! For instructions on operating rekordbox, see the rekordbox (Mac/Windows) user's manual. The rekordbox (Mac/Windows) user's manual can be
viewed from the [Help] menu of rekordbox.
! Also, for DJ players and DJ mixers, up to four PRO DJ LINK-compatible players can be connected with LAN cables (CAT5e) using PRO DJ LINK
connections.
! A switching hub (commercially available) may be necessary, depending on the combination of models used. Use a switching hub of 100 Mbps or
greater. Some switching hubs may not operate properly.
! A switching hub (commercially available) is necessary to connect to a mixer equipped with only one LAN port. For mixers with enough LAN ports for
all the DJ players and computers in the system, connect directly to the LAN ports on the mixer's rear panel, without using a hub.
PRO DJ LINK (SD & USB Export)
! rekordbox music files and data can be exchanged with this unit using a memory device (flash memory, hard disk, etc.), eliminating the need to take
a computer into the DJ booth. Such information as playlists, cues, loops and hot cues set in advance with rekordbox can be used for playback.
Cautions
In order to maximize the use of music file management functions of rekordbox, please match the player number with the channel of audio cable
entered in the mixer.
If the player number is different, change the [PLAYER No.] setting on the [UTILITY] screen.
= For instructions on changing the settings on the [UTILITY] screen, see this product's operating instructions.
! When a storage device is connected to this unit, [PLAYER No.] is displayed in gray and cannot be changed. Disconnect the storage device or LAN
cable to turn the link off, then change the setting.
8
En
Computer
rekordbox
Switching hub
LAN cable
LAN cable
Audio Audio cable
cable
DJ player DJ mixer
USB device on
SD memory
which
card on which
rekordbox data
rekordbox data
is recorded
is recorded
LAN cable
L
R
AUDIO OUT DIGITAL OUT LINK
AC IN
Power cord
USB USB
STOP STOP
SD SD
HOT CUE HOT CUE TIM TIM
MO MO
A A E E
B B F F
C C G G
IN IN
4 / 4 /
USB
Rear panel
To an AC outlet