Flashing Display Lights - GEAppliances GSD5610 Owner's Manual

Flashing display lights.

Status Lights What It Means
STATUS
CLEANSENSOR Error
SENSING
WASHING
RINSING
DRYING
SANITIZED
STATUS
START/RESET pad has
SENSING
been pressed
WASHING
RINSING
DRYING
SANITIZED
STATUS
Control Error
SENSING
WASHING
RINSING
DRYING
SANITIZED
PLUS A
BEEPING
SOUND
STATUS
Control Error
SENSING
WASHING
RINSING
DRYING
SANITIZED
PLUS A
BEEPING
SOUND
10
What To Do
If the sensing light doesn't come on
during the NORMAL or POTS & PANS
cycles, the CLEANSENSOR is not
working. Call for service. The
dishwasher will continue to work
without the CLEANSENSOR.
NOTE: This light will not stay on the
entire cycle.
Allow dishwasher to drain and reset
before selecting a new cycle.
Press the START/RESET pad to turn
off the beeper. But the RINSING
light will continue to flash. If this
continues call for service.
Press the START/RESET pad to turn
off the beeper and the dishwasher
will attempt to reset. Then restart the
wash cycle. If this error continues
call for service.