Advertisement
Quick Links
Installation & Maintenance Instructions
Kamstrup 382M
Reading Office
Aberdeen Office
Cutbush Park, Danehill, Lower Earley,
Unit 6 Airside Business Park, Kirkhill Industrial Estate,
Reading, Berkshire. RG6 4UT. UK.
Dyce, Aberdeen. AB21 0GT. UK.
Tel: +44 (0)118 9311188
Tel: +44 (0)1224 725999
Email: info@able.co.uk
Email: ab@able.co.uk
Internet: www.able.co.uk
e-procurement: www.247able.com
Registered in England No: 01851002
VAT No: GB 417 2481 61
Advertisement
Related Manuals for ABLE Kamstrup 382M
Summary of Contents for ABLE Kamstrup 382M
- Page 1 Installation & Maintenance Instructions Kamstrup 382M Reading Office Aberdeen Office Cutbush Park, Danehill, Lower Earley, Unit 6 Airside Business Park, Kirkhill Industrial Estate, Internet: www.able.co.uk Reading, Berkshire. RG6 4UT. UK. Dyce, Aberdeen. AB21 0GT. UK. e-procurement: www.247able.com Tel: +44 (0)118 9311188...
- Page 2 Installation manual Connect the meter in accordance with the installation diagram on the meter’s type label. Depending on the configuration a fixed value will be displayed, or the display will change between selected indications every 10 seconds. It is possible to change the display reading manually by activating the push button on the meter.
- Page 3 Installation manual The phase indications have various functions. They indicate the two situations described below. From the connection of the meter: Indications L1, L2, L3 Indicate Voltage is above minimum limit (160V) Voltage is below minimum limit (160V) Indications Indicate The load is above the minimum (2.3W) The load is below minimum limit (2.3W) If the load exceeds the minimum limit and the meter is configured with this reading,...
- Page 4 Installation manual With built-in radio If the meter is supplied with integral radio for establishment of remote reading, the meter automatically connects to a radio network. The integral radio is equipped with an internal antenna. The radio signal strength can be read by means of a hand-held terminal. If the radio signal is not sufficient, an external antenna must be connected.