Marantz CD6004 Owner's Manual page 31

n File Info (File information display selection)
[TEXT]
When is pressed while playing iPod files on the unit, file
information is shown on the display.
Here, you can set which information is displayed first when
is pressed.
1
Select "iPod Setup=>" using
press [ENTER] .
2
Select "File info=>" using
[ENTER]
press .
3
Select the information you want to display first using
[ ] [ ]
8 and 9 , and press
GSelectable itemsH
The track name is displayed.
1 Title
The artist name is displayed.
2 Artist
3 Album The album name is displayed.
4 Time The time information is displayed.
4
Press [MENU] .
The settings are saved, and the display returns to normal.
NOTE
When "iPod Ctrl=>" is set to "1 Direct", the display order of file
information cannot be changed.
n Buttons that can be used when playing back
from an iPod
Remote control
Operation on the unit
buttons
1 Plays the track
3 Pause
2 Return to the first track in the folder
Skip to previous or next track
8, 9
Fast forward and rewind cannot be used
REPEAT
Switches the repeat function
RANDOM Switches the shuffle function
Plays the first approximately 10 seconds of
AMS
the track, then skips to the next track
TEXT Switches the display
Downloaded From DvDPlayer-Manual.com Marantz Manuals
n iPod Ctrl (Operating an iPod with its own controls)
You can set whether to perform iPod operations using the iPod
controls, or using the unit remote control.
[TEXT]
1
Select "iPod Setup=>" using
press
[ ] [ ]
8 and 9 , and
2
Select "iPod Ctrl=>" using
press
[ ] and [ ] , and
8 9
3
Select the device you want to operate using
[9]
and
[ENTER]
.
GSelectable itemsH
1 Direct
2 Remote
Display mode
Display location
Playable
files
Active
buttons
z Only audio is played back.
• For details on how to playback when "2 Remote" is set, see
"Database (iPod database selection)" (vpage 25).
4
Press
The settings are saved, and the display returns to normal.
When "1 Direct" is set, playback, pause, skip and stop can be
performed using the unit remote control.
NOTE
1st generation iPod nano or iPod with Video do not support "1 Direct".
When a 1st generation iPod nano or iPod with Video is connected, the
mode automatically switches to "2 Remote".
[ ] and [
8 9
[ENTER]
.
[ ] [
8 and 9
[ENTER] .
[ENTER]
, and press .
In this mode, the iPod controls are operated directly
while looking at the iPod display screen.
In this mode, the iPod is operated while the iPod
information is shown on the unit display.
1 Direct 2 Remote
iPod display Unit display
Audio file S
z
Video file S
Remote control
S
and this unit
iPod S
[MENU] .
n Resume (Resume playback settings)
You can set whether to record the place where playback is stopped.
When resume playback is set to on, this unit starts iPod playback
from the start of the file that was previously being played.
] , and
1
Select "iPod Setup=>" using
[ENTER]
press .
]
, and
2
Select "Resume=>" using
press [ENTER] .
[8]
3
Select "1 Off" or "2 On" for the resume playback
settings using [ ] and
8
GSelectable itemsH
Resume playback is not set.
1 Off
2 On Resume playback is set.
4
[MENU]
Press .
The settings are saved, and the display returns to normal.
NOTE
S
Resume playback cannot be used if
A
3
Press to pause the track. Even if the input source is changed or the
unit power is switched off, when the iPod is played again, playback
S
starts from the start of the track that was previously being played
back.
A
ENGLISH
Performing menu settings
[ ] and [ ] , and
8 9
[ ] [ ]
8 and 9 , and
[ ] , and press [ENTER] .
9
2
is pressed to stop the iPod.
26 26