Advertisement
Appearance & installation sizes
Wiring Diagram
Technical Parameter
V~
/Hz
CAUTIONS AND MAINTENANCES
Do not let the water or other liquid splash in the motor.
According to different heating source, should supply the correspondence drainage pipe,
and have the measure for keeping pipeline temperature. For hot water source, the below for
water in, and upside for backwater. In the place of outlet backwater or highest tube should
install the auto deflate valve.
For hot water source, the hot water should be intenerated water.
Every operation must drain out the cooling water or air inside the unit. Then turn on the unit
after 10 minutes. And draining out all the water in the unit when stop working.
For ensuring the unit's operation, it must supply the hot source continuously.
For safe the unit, it must not supply the hot source only but do not turn on the unit!
If there is anything abnormal, should be stop the unit and check the problem.
Keep the unit cleans, cleaning the heat exchanger or parts of the unit for some times.
Routing maintenance must be done every year.
(
Distance of hanging hold
MODEL
Air
Air
speed
volume
Ft/s
<
<
<
)
In/out water 100-65
In/out water 90-60
N.W(LBS)
In/out water 85-55
Advertisement
