Remote Control; Cooler Location - Honeywell CS071AE User Manual

USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time has
passed, the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged
from electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.
SWING
Press the SWING button until the SWING indicator light is illuminated on the
control panel. The louvers will begin to move left to right automatically.
SLEEP*
When the SLEEP* mode is selected, the fan will run on High speed for one hour then on Medium speed
for the second hour and then run on Low speed continuously.

REMOTE CONTROL

POWER
COOL
SPEED
TIMER
SWING
SLEEP
Note:
• The remote control requires a CR2032(1 x 3V) coin type or equivalent battery for replacement.
• Open the battery compartment at the back of the remote control and insert a battery inside. Care
must be taken to insert the batteries according to the correct polarity (+ / –) markings shown inside
the battery compartment.
• Always point the remote control signal transmitter towards the unit when operating. Make sure that
the signal path is not obstructed.
• Remove the batteries if the unit is not going to be used for an extended period of time.
• Do not drop the remote control.
• Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.
• Do not mix old and new batteries.
• Do not recharge the battery.
• Exhausted batteries are to be removed from the product and safely disposed of as per local
regulations.
• Do not dispose of batteries in fire. Batteries may explode or leak.
WARNING: Caution for ingestion of the small battery. Keep away from children and animals.

COOLER LOCATION

Make sure to position the air cooler correctly before you set up and start using the product. Please refer
to the COOLER LOCATION section of the separate Safety & Maintenance Guide.
Power : ON / OFF
Speed : Low / Medium / High
Cool : Evaporative cooling ON / OFF
Swing : Controls the motion of the louvers
Timer : Controls the Timer function for automatic off
Sleep* : Turn ON / OFF Sleep* mode
EN 2
LOUVER
MOVEMENT
*Applicable for models Sleep feature only.
*Applicable for models Sleep feature only.