Installing the base cover
1.
Align the tabs on the base cover with the slots on the computer.
2.
Press the edges of the cover until it clicks into place.
3.
Tighten the screws to secure the base cover to the computer.
4.
Follow the procedure in
Battery
Removing the battery
1.
Follow the procedure in
2.
Remove the
base
cover.
3.
To remove the battery:
a. Disconnect the battery cable from the connector on the system board [1].
b. Remove the screws that secure the battery to the computer [2].
c. Lift the battery away from the computer [3].
10
After working inside your
computer.
Before working inside your
computer.