Installing the speakers
1.
Place the speakers into the slots on the computer.
2.
Tighten the screws to secure the speaker to the computer.
3.
Route the speaker cable through the retention clips on the touchpad buttons and the computer.
4.
Connect the speaker cable to the connector on the system board.
5.
Install the:
a.
battery
b.
base cover
6.
Follow the procedure in
Coin cell battery
Removing the coin cell battery
1.
Follow the procedure in
2.
Remove the:
a.
base cover
b.
battery
3.
To remove the coin cell battery:
a. Disconnect the coin cell battery cable from the connector on the system board [1].
b. Lift the coin cell battery to release it from the adhesive and remove it from the system board [2].
After working inside your
computer.
Before working inside your
computer.
15