TIP! When routing the cable:
•
Make sure any extra cable does not interfere with normal car operation .
•
Make sure there are no knots or twists in the cable as these can affect signal
reception and damage the cable .
•
Include enough slack in the cable to accommodate open doors or trunk lids .
•
To fasten the cable, use electrical tape or zip ties, and secure the cable in areas
where hinges don't pinch the cable .
•
Hide extra cable in the trim .
Step 3: Install the Swivel Mount
CAUTION! The adhesive used with the swivel mount may make it difficult to remove
the swivel mount later . Do not install the swivel mount on leather surfaces, and make
sure the air temperature is at least 60°F (15°C) .
1
Select whether you want to install the swivel mount vertically or
horizontally on the dashboard .
Magnet
15