Panasonic PV-GS70 Operating Instructions Manual page 77

2
4
5
3
4
ª Installation of ArcSoft Software Suite
1
Insert the supplied CD-ROM into the personal
computer's CD-ROM drive.
2
Select the software to be installed from
[Setup Menu].
3
Select the desired language on the
[Choose Setup Language] dialogue, and click [OK].
≥Installation begins.
≥After reading the displayed contents, please carry out the
installation according to instructions.
≥If a language other than the OS language is selected, the
characters may not be presented correctly.
4
When the component selection screen is displayed,
check the software to be installed and click [Next].
5
After the completion of setup, click on [Finish]
≥Installation will be completed.
ª Software Installation
1
Turn on Computer and start up Macintosh.
2
Insert supplied CD-ROM into the CD-ROM drive.
3
Double click the icon of a CD-ROM that appears.
4
Double click the software to be installed from
[ArcSoft].
5
Follow the instructions on the computer screen until
the installation is complete.
ª To start software in the ArcSoft Software Suite
1
Select [Start] >> [All Programs (Programs)] >>
[ArcSoft Software Suite] >> [ArcSoft Panorama
Maker 3.0] (or [ArcSoft PhotoBase 4.0] or [ArcSoft
PhotoImpression 4.0] or [ArcSoft PhotoPrinter 4.0]).
For Information on ArcSoft Software:
TEL: 1-510-440-9901
FAX: 1-510-440-1270
Web Site: www.arcsoft.com
E-mail: support@arcsoft.com
Refer to Help information about application operations and
other Error messages.
77
(Macintosh)