1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Server
  5. tihnkserver rd330
  6. Hardware maintenance manual

Lenovo tihnkserver rd330 Hardware Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Machine Types: 3072, 3073, 3074, 4302, 4304, and 4305

Advertisement

Table of Contents
loading

Related Manuals for Lenovo tihnkserver rd330

Summary of Contents for Lenovo tihnkserver rd330

  • Page 1 Machine Types: 3072, 3073, 3074, 4302, 4304, and 4305...
  • Page 2 Note: Read Me First Sixth Edition (March 2015) © Copyright Lenovo 2012, 2015.

  • Page 3: Table Of Contents

    Contents Safety information ..Chapter 1. General information ..1 Chapter 2. Server setup road map . . . 5 Chapter 3. Product overview ..7 Chapter 6.
  • Page 4 Chapter 8. Getting information, help, and service ... . . Appendix A. Notices ..Chapter 7. Troubleshooting and diagnostics ... . . Index.

  • Page 5: Safety Information

    Safety information Note: 製品をご使用になる前に、製品に付属の Documentation DVD に収録されているマルチリンガルの「安 全に正しくご使用いただくために」を読んで理解してください。 제품을 사용하기 전에 제품과 함께 제공되는 문서 DVD의 다국어 안전 지침을 주의 깊게 읽어보십시오.
  • Page 6 在使用本产品之前，请务必先阅读和了解产品附带的文档 DVD 中的多语言安全说明。 使用本產品之前，請務必閱讀並瞭解產品隨附的文件 DVD 上的多國語言版本安全資訊。 Important: Safety Information Safety Information...
  • Page 7 Statement 1 DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. Connect all power cords to a properly wired and grounded electrical outlet. Connect to properly wired outlets any equipment that will be attached to this product.
  • Page 8 Statement 3 CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. •...
  • Page 9 Statement 6 CAUTION: If you install a strain-relief bracket option over the end of the power cord that is connected to the device, you must connect the other end of the power cord to a power source that is easily accessible in case it needs to be disconnected.
  • Page 10 Statement 11 CAUTION: The following label indicates a potential heat hazard. Statement 12 DANGER Overloading a branch circuit is a potential fire hazard and a shock hazard under certain conditions. To avoid these hazards, ensure that your system electrical requirements do not exceed branch current ratings at the installation site.
  • Page 11 Statement 16 CAUTION: To reduce the risk of electric shock or energy hazards: • This equipment must be installed by trained service personnel in a restricted-access location, as defined by your local electrical code and the latest edition of IEC 60950. •...

  • Page 12: Safety Inspection Guide

    Statement 20 CAUTION: A lithium ion battery is provided. To avoid possible explosion, do not burn the battery. Replace the battery only with the Lenovo-approved part. Recycle or discard the battery as instructed by local regulations. Safety inspection guide...
  • Page 13 Grounding requirements...

  • Page 15: Chapter 1. General Information

    Chapter 1. General information Introduction Hardware Maintenance Manual Hardware Maintenance Manual Note: Warranty and Support Information Warranty and Support Information Server documentation...
  • Page 16 Printed documents Read Me First Important Notices Rack Installation Instructions Note: Documentation DVD Note: Safety Information Warranty and Support Information Lenovo License Agreement User Guide...
  • Page 17 Rack Installation Instructions ThinkServer Management Module User Guide Note: MegaRAID SAS Software User Guide Note: Document only for trained service personnel Hardware Maintenance Manual...

  • Page 19: Chapter 2. Server Setup Road Map

    Chapter 2. Server setup road map Rack Installation Instructions...

  • Page 21: Chapter 3. Product Overview

    Chapter 3. Product overview Server package Note: Figure 1. Server package Features...
  • Page 22 Microprocessor Memory Power supply Note: System fans Internal drives Note: Expansion slots...
  • Page 23 Input/Output (I/O) features Video subsystem Ethernet connectivity Reliability, availability, and serviceability Security features Note: Basic system management features...
  • Page 24 ThinkServer Management Module User Guide Advanced system management features ThinkServer Management Module User Guide...

  • Page 25: Specifications

    Specifications Dimensions Weight Environment Electrical input Software ThinkServer EasyStartup ThinkServer EasyStartup...
  • Page 26 ThinkServer EasyUpdate Firmware Updater Lenovo ThinkServer EasyManage BIOS and TMM update utilities RAID configuration utilities Remote management software ThinkServer Management Module User Guide Lenovo Rack Planner ThinkServer Smart Grid Technology...
  • Page 27 Diagnostic programs Locations Machine type, model, and serial number label...
  • Page 28 Note: Figure 2. Label on server models with 3.5-inch hard disk drives Figure 3. Label on server models with 2.5-inch hard disk drives Front view of the server...
  • Page 29 Note: Front view of server models with 3.5-inch hard disk drives Figure 4. Front view of server models with 3.5-inch hard disk drives Front panel Intelligent Diagnostics Module Pull-out information card Slim optical drive Right rack handle Left rack handle Rack Installation Instructions...
  • Page 30 3.5-inch hard disk drive area Figure 5. 3.5-inch hard disk drive bay numbers (top view of the server) Front view of server models with 2.5-inch hard disk drives Figure 6. Front view of server models with 2.5-inch hard disk drives Front panel Pull-out information card...
  • Page 31 Intelligent Diagnostics Module Right rack handle Left rack handle Rack Installation Instructions 2.5-inch hard disk drive area Figure 7. 2.5-inch hard disk drive bay numbers (top view of the server) Slim optical drive Front panel...
  • Page 32 Figure 8. Front panel Note: Power switch with power status LED Power status LED Description Color ID button with ID LED ID LED Description Color...
  • Page 33 NIC 1 status LED NIC 2 status LED NIC status LED Color Description System error LED System error LED Color Description Front USB connector 1 Front USB connector 2 Front VGA DB-15 connector Intelligent Diagnostics Module...
  • Page 34 Figure 9. IDM panel Power supply error LED Ambient temperature limit LED System fan error LED Memory module status LED...
  • Page 35 Microprocessor status LED (also known as CPU error LED) Rear view of the server MGMT Figure 10. Rear view of the server Hot-swap redundant power supply 2 (available in some models) Hot-swap redundant power supply 1 Low-profile PCI Express card slot Physical link width Negotiable link width Supported card length and height...
  • Page 36 PCI Express card slot Physical link width Negotiable link width Supported card length and height 5 8 9 Ethernet connectors (RJ-45) Notes: Figure 11. Ethernet status LEDs Ethernet status LED Color Status Description USB connectors (4) VGA DB-15 connector...

  • Page 37: Server Components

    Serial port ID LED ID LED Color Description Server components Note:...
  • Page 38 Components of server models with 3.5-inch hot-swap hard disk drives Figure 12. Components of server models with 3.5-inch hot-swap hard disk drives...
  • Page 39 Components of server models with 2.5-inch hot-swap hard disk drives Figure 13. Components of server models with 2.5-inch hot-swap hard disk drives Notes:...
  • Page 40 Description Self-service CRU Optional-service...

  • Page 41: Raid Card

    Hot-swap hard disk drive status LEDs Figure 14. Hot-swap hard disk drive status LEDs Hard disk drive activity LED Hard disk drive RAID status LED Description RAID card Note:...
  • Page 42 ThinkServer RAID 500 Adapter (also known as ThinkServer 9240-8i RAID 0/1 Adapter) Figure 15. ThinkServer RAID 500 Adapter Port 0 Port 1 ThinkServer RAID 500 Upgrade Key for Advanced RAID connector...
  • Page 43 ThinkServer RAID 700 Adapter (also known as ThinkServer 9260-8i SAS RAID Adapter) Figure 16. ThinkServer RAID 700 Adapter Ports 7-4 Ports 3-0 ThinkServer RAID 700 Battery connector Hot-swap hard disk drive backplane Backplane for 3.5-inch hard disk drives...
  • Page 44 Figure 17. Front view of the backplane for 3.5-inch hard disk drives Figure 18. Rear view of the backplane for 3.5-inch hard disk drives 8-pin power connector Optical drive power connector Mini-SAS ports 0-3 Backplane for 2.5-inch hard disk drives...
  • Page 45 Figure 19. Front view of the backplane for 2.5-inch hard disk drives Figure 20. Rear view of the backplane for 2.5-inch hard disk drives 8-pin power connector Mini-SAS ports 4-5 Mini-SAS ports 0-3 Optical drive power connector Mini-SAS to mini-SAS signal cable connections...
  • Page 46 Connecting cables from the system board to the backplane Note: Connecting cables from the RAID card to the backplane Note: Figure 21. Connecting cables from the RAID card to the backplane...

  • Page 47: System Board Components

    System board components Figure 22. System board components...
  • Page 48 Front panel connector Internal USB connector 1 Internal USB connector 2 Intelligent Diagnostics Module connector Front VGA connector SATA connector 0 SAS connector 4-7 SAS connector 0-3...
  • Page 49 System board battery Platform Controller Hub (PCH) Internal USB Type A connector 1 Internal USB Type A connector 2 TMM Premium connector TPM connector iButton socket ThinkServer Management Module Riser card assembly 1 slot Riser card assembly 2 slot...

  • Page 50: System Board Jumpers And Switches

    Redundant power supply connector 1 Redundant power supply connector 2 Backplane power connector 1 Backplane power connector 2 23 25 27 28 30 32 System fan connectors 26 31 Memory slots Microprocessor socket 2 Microprocessor socket 1 System board jumpers and switches...
  • Page 51 Figure 23. Default jumper setting...
  • Page 52 Figure 24. System board jumpers and switches Table 1. System jumpers Attention: Clear CMOS jumper Note:...
  • Page 53 Rack Installation Instructions ThinkServer Management Module Enable/Disable jumper...
  • Page 54 Switches Figure 25. Switches Table 2. Switches BIOS recovery switch Clear password switch...

  • Page 55: System Board Leds

    Rack Installation Instructions ME in force update switch Note: Rack Installation Instructions System board LEDs...
  • Page 56 Note: Figure 26. System board LEDs ThinkServer Management Module status LED Description ThinkServer Management Module Color status LED...
  • Page 57 System fan error LEDs...

  • Page 59: Chapter 4. Turning On And Turning Off The Server

    Chapter 4. Turning on and turning off the server Turning on the server ThinkServer Management Module User Guide Turning off the server CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device.
  • Page 60 Notes:...

  • Page 61: Chapter 5. Configuring The Server

    Chapter 5. Configuring the server Using the Setup Utility program Starting the Setup Utility program Viewing information in the Setup Utility program Main Advanced Processor Configuration Memory Configuration...

  • Page 62: Setup Utility Program Interface

    SATA/SAS Configuration Server Management System Information Setup Utility program interface Notes: Main menu Main Main Advanced menu Advanced Advanced...
  • Page 63 Notes: Enabled Disabled Advanced PCI Configuration ACPI Configuration Processor Configuration Memory Configuration Chipset Configuration SATA/SAS Configuration Intel TXT (LT-SX) Configuration USB Configuration Super IO Configuration Serial Port Console Redirection Network Stack Security menu Security Notes: Enabled Disabled Security Administrator Password User Password TPM/TCM Server Management menu...

  • Page 64: Setting The System Date And Time

    Server Management Erase SEL System Information BMC Network Configuration Boot Options menu Boot Options Boot Manager menu Boot Manager Save & Exit menu Save & Exit Save & Exit Save & Exit Save Changes and Exit Save Changes and Reset Discard Changes and Exit Discard Changes Restore Defaults...

  • Page 65: Using Passwords

    Using passwords Setup Utility program password types Administrator password User password Note: Password considerations Notes: Setting, changing, or deleting a password...

  • Page 66: Selecting A Startup Device

    Security Administrator Password User Password Note: Selecting a startup device Note: Note: Boot Options Boot Option #1 Boot Option #5 Configuring the TPM function Security TPM/TCM ➙ TPM Support TPM Support Enabled TPM Support Enabled TPM State TPM State Enabled...

  • Page 67: Setting The Mode Of The Ethernet Connector 0

    Setting the mode of the Ethernet connector 0 Server Management BMC Network Configuration ➙ BMC LAN Share Setting Shared Dedicated Exiting the Setup Utility program Save & Exit ➙ Save Changes and Exit Save & Exit ➙ Discard Changes and Exit Save &...
  • Page 68 Updating (flashing) the BIOS Notes: Save as User Defaults Save & Exit Restore User Defaults Save & Exit Restore User Defaults Save & Exit Recovering from a BIOS update failure Note:...

  • Page 69: Using The Thinkserver Easystartup Program

    Rack Installation Instructions Note: Using the ThinkServer EasyStartup program ThinkServer EasyStartup ThinkServer EasyStartup...
  • Page 70 Features of the ThinkServer EasyStartup program ThinkServer EasyStartup Starting the ThinkServer EasyStartup program User Guide ThinkServer EasyStartup Note: ThinkServer EasyStartup Next Agree...
  • Page 71 Notes: Compatibility notes User Guide Home Compatibility notes User Guide Hardware list Configure RAID Install operating system Download drivers ThinkServer EasyStartup Note: About...

  • Page 72: Configuring Raid

    Using the ThinkServer EasyStartup program on a Windows operating system ThinkServer EasyStartup ThinkServer EasyStartup Notes: ThinkServer EasyStartup ThinkServer EasyStartup ThinkServer EasyStartup ThinkServer EasyStartup Note: Configuring RAID About RAID...
  • Page 73 RAID 0 RAID 1 RAID 5 RAID 10...
  • Page 74 RAID 50 Note: MegaRAID SAS Software User Guide Configuring RAID using the ThinkServer EasyStartup program ThinkServer EasyStartup ThinkServer EasyStartup ThinkServer EasyStartup Configuring the ThinkServer RAID 300...
  • Page 75 RAID array status Online Degrade Offline Starting the LSI Software RAID Configuration Utility program LSI Software RAID Configuration Utility program interface...
  • Page 76 Management Menu Management Menu Configure Initialize Note: Objects Rebuild Check Consistency Table 3. LSI Software RAID Configuration Utility program menu items Menu item Submenu item Comments Configure Easy Configuration New Configuration View/Add Configuration Clear Configuration Select Boot Drive Initialize Objects Adapter Virtual Drive Physical Drive...
  • Page 77 Creating, adding, or deleting a RAID array Note: Easy Configuration View/Add Configuration Clear Configuration Attention: New Configuration Attention: Initializing a virtual drive Notes:...
  • Page 78 Initialize Setting a hot-spare drive MegaRAID SAS Software User Guide Objects ➙ Physical Drive Make Hot Spare Rebuilding a physical drive MegaRAID SAS Software User Guide Rebuild Note:...
  • Page 79 Note: Objects ➙ Adapter ➙ Rebuild Rate Running a consistency check Check Consistency Note: Objects ➙ Adapter ➙ Chk Const Rate Installing and using the MegaRAID Storage Manager program ThinkServer EasyStartup ThinkServer EasyStartup...

  • Page 80: Configuring The Ethernet Controllers

    MegaRAID SAS Software User Guide Note: MegaRAID SAS Software User Guide Configuring the advanced SATA/SAS hardware RAID ThinkServer EasyStartup ThinkServer EasyStartup Note: ThinkServer EasyStartup MegaRAID SAS Software User Guide Configuring the Ethernet controllers...
  • Page 81 Updating the firmware Using the Firmware Updater program Note: Using the Lenovo ThinkServer EasyManage program...

  • Page 83: Chapter 6. Installing, Removing, Or Replacing Hardware

    Chapter 6. Installing, removing, or replacing hardware Guidelines Precautions...
  • Page 84 Handling static-sensitive devices Attention: Notes: Note:...
  • Page 85 System reliability guidelines Working inside the server with the power on Attention: Removing the server cover Attention:...
  • Page 86 Note: Rack Installation Instructions Figure 27. Pressing the release button...
  • Page 87 Note: Figure 28. Removing the server cover Attention: Installing, removing, or replacing hardware Notes: Attention: Removing and reinstalling the rack handles Attention:...
  • Page 88 Note: Figure 29. Removing the rack handles...

  • Page 89: Removing And Reinstalling The Cooling Shroud

    Figure 30. Installing the rack handles Removing and reinstalling the cooling shroud Removing the cooling shroud Attention: Note:...
  • Page 90 Rack Installation Instructions Figure 31. Removing the cooling shroud Attention: Reinstalling the cooling shroud Attention: Note:...

  • Page 91: Installing Or Removing A Memory Module

    Note: Figure 32. Reinstalling the cooling shroud Installing or removing a memory module Note: Memory module installation rules...
  • Page 92 Figure 33. Memory slots on the system board...
  • Page 93 Notes: Figure 34. CPU1 DIMMs Table 4. Memory module installation rules for servers with one microprocessor CPU1 DIMM...

  • Page 94: Installing A Memory Module

    Notes: Figure 35. CPU1 DIMMs and CPU2 DIMMs Table 5. Memory module installation rules for servers with two microprocessors CPU1 DIMM CPU2 DIMM Installing a memory module Attention:...
  • Page 95 Notes: Rack Installation Instructions Figure 36. Opening the retaining clips of the memory slots Note:...
  • Page 96 Note: Figure 37. Installing a memory module What to do next: Removing a memory module Attention: Note: Rack Installation Instructions...

  • Page 97: Installing Or Removing The Ethernet Card

    Figure 38. Removing a memory module What to do next: Installing or removing the Ethernet card Note: Installing the Ethernet card Attention: Notes:...
  • Page 98 Rack Installation Instructions Note: Figure 39. Removing a PCI Express card slot bracket Note:...
  • Page 99 Figure 40. Installing the Ethernet card What to do next: Note: ThinkServer EasyStartup ThinkServer EasyStartup Removing the Ethernet card Attention:...
  • Page 100 Notes: Rack Installation Instructions Note: Note: Figure 41. Removing the Ethernet card What to do next:...
  • Page 101 Installing or removing the RAID card Note: Installing the RAID card Attention: Notes: Rack Installation Instructions...
  • Page 102 Figure 42. Removing a PCI Express card slot bracket Note: Figure 43. Removing the full-height bracket from the RAID card...
  • Page 103 Figure 44. Installing the low-profile bracket to the RAID card Figure 45. Installing the RAID card What to do next:...
  • Page 104 Note: Removing the RAID card Attention: Notes: Rack Installation Instructions...
  • Page 105 Note: Figure 46. Removing the RAID card What to do next: Installing or removing the ThinkServer RAID 500 Upgrade Key for Advanced RAID Installing the TR 500 Key Attention:...
  • Page 106 Attention: Note: Rack Installation Instructions Note:...
  • Page 107 Note: Figure 47. Installing the TR 500 Key What to do next: MegaRAID SAS Software User Guide Removing the TR 500 Key Attention: Attention: Notes:...
  • Page 108 Rack Installation Instructions Note: Figure 48. Removing the TR 500 Key What to do next:...

  • Page 109: Installing Or Removing The Thinkserver Raid 700 Battery

    MegaRAID SAS Software User Guide Installing or removing the ThinkServer RAID 700 Battery Attention: Installing the ThinkServer RAID 700 Battery Attention: Note: Rack Installation Instructions...
  • Page 110 Note: Notes: Figure 49. Installing the TR 700 Battery What to do next: Removing the ThinkServer RAID 700 Battery Attention:...
  • Page 111 Notes: Rack Installation Instructions Note: Figure 50. Removing the TR 700 Battery...
  • Page 112 What to do next: Installing or removing the ThinkServer RAID 300 Upgrade Key for Advanced RAID Installing the TR 300 Key Attention: Notes: Rack Installation Instructions...
  • Page 113 Figure 51. Installing the TR 300 Key What to do next: Removing the TR 300 Key Attention:...
  • Page 114 Notes: Rack Installation Instructions...
  • Page 115 Figure 52. Removing the TR 300 Key What to do next:...
  • Page 116 Installing or removing the ThinkServer Management Module Premium Installing the TMM Premium Attention: Notes: Rack Installation Instructions...
  • Page 117 Note: Figure 53. Installing the TMM Premium What to do next: ThinkServer Management Module User Guide Removing the TMM Premium Attention:...
  • Page 118 Notes: Rack Installation Instructions Figure 54. Removing the TMM Premium...
  • Page 119 What to do next: Installing or removing the ThinkServer Trusted Platform Module Installing the ThinkServer Trusted Platform Module Attention: Notes: Rack Installation Instructions Note:...
  • Page 120 Figure 55. Installing the TPM What to do next: Removing the ThinkServer Trusted Platform Module Attention:...
  • Page 121 Notes: Rack Installation Instructions...
  • Page 122 Note: Figure 56. Removing the TPM What to do next: Installing or replacing a hot-swap redundant power supply...
  • Page 123 Note: CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
  • Page 124 Figure 57. Removing the protective shield for the power supply bay...
  • Page 125 Figure 58. Installing a hot-swap redundant power supply Replacing a hot-swap redundant power supply Attention: Notes:...

  • Page 126: Installing Or Replacing A Heat Sink

    Note: Figure 59. Removing a hot-swap redundant power supply Installing or replacing a heat sink Attention:...
  • Page 127 CAUTION: The heat sink might be very hot. Turn off the server and wait three to five minutes to let the server cool before removing the server cover. Notes: Rack Installation Instructions...
  • Page 128 Note: Figure 60. Removing the screws that secure the heat sink Notes:...

  • Page 129: Installing Or Replacing The Microprocessor

    Figure 61. Installing the screws to secure the heat sink What to do next: Installing or replacing the microprocessor Installing the second microprocessor Attention:...
  • Page 130 CAUTION: Turn off the server and wait three to five minutes to let the server cool before removing the server cover. Notes: Rack Installation Instructions...
  • Page 131 Figure 62. Opening the handle and microprocessor retainer...
  • Page 132 Figure 63. Removing the microprocessor socket cover Notes: Figure 64. Do not touch the pins...
  • Page 133 Note: Figure 65. Installing the microprocessor...

  • Page 134: Replacing The Microprocessor

    Figure 66. Securing the microprocessor in the socket What to do next: Replacing the microprocessor Attention: CAUTION: The heat sink and microprocessor might be very hot. Turn off the server and wait three to five minutes to let the server cool before removing the server cover.
  • Page 135 Notes: Rack Installation Instructions...
  • Page 136 Figure 67. Opening the handle and microprocessor retainer Notes: Figure 68. Removing the microprocessor...
  • Page 137 Figure 69. Do not touch the pins Note: Figure 70. Installing the microprocessor...
  • Page 138 Figure 71. Securing the microprocessor in the socket What to do next: Installing or replacing a hot-swap hard disk drive Attention:...
  • Page 139 Attention: Notes:...
  • Page 140 Figure 72. Opening the handle of the hot-swap hard disk drive Figure 73. Opening the handle of the dummy hot-swap hard disk drive tray...
  • Page 141 Figure 74. Removing the hot-swap hard disk drive Figure 75. Removing the dummy hot-swap hard disk drive tray Note:...

  • Page 142: Installing Or Replacing The Optical Drive

    Figure 76. Installing the hot-swap hard disk drive What to do next: Installing or replacing the optical drive Attention:...
  • Page 143 Installing or replacing the optical drive for server models with 3.5-inch hard disk drives Attention: CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation.
  • Page 144 Figure 77. Removing the optical drive for server models with 3.5-inch hard disk drives Figure 78. Installing the optical drive retaining bracket...
  • Page 145 Figure 79. Installing the optical drive for server models with 3.5-inch hard disk drives Figure 80. Connecting cables to the rear of the optical drive What to do next: Installing or replacing the optical drive for server models with 2.5-inch hard disk drives Attention:...
  • Page 146 CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. •...
  • Page 147 M em Figure 81. Removing the optical drive for server models with 2.5-inch hard disk drives Figure 82. Installing the optical drive retaining bracket...
  • Page 148 Figure 83. Connecting cables to the rear of the optical drive Figure 84. Installing the optical drive for server models with 2.5-inch hard disk drives What to do next: Replacing the hot-swap hard disk drive backplane Attention:...
  • Page 149 Notes: Rack Installation Instructions...
  • Page 150 Figure 85. Releasing the backplane...
  • Page 151 Figure 86. Removing the backplane Note:...
  • Page 152 Figure 87. Installing the backplane...

  • Page 153: Replacing The Intelligent Diagnostics Module

    Figure 88. Securing the backplane What to do next: Replacing the Intelligent Diagnostics Module Attention:...
  • Page 154 Notes: Rack Installation Instructions Figure 89. Removing the IDM...

  • Page 155: Replacing A System Fan

    Figure 90. Installing the IDM What to do next: Replacing a system fan Attention: CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
  • Page 156 Note: Rack Installation Instructions Figure 91. Removing the system fan...

  • Page 157: Replacing The Front Panel Board

    Note: Figure 92. Installing the system fan What to do next: Replacing the front panel board Attention: Notes:...
  • Page 158 Rack Installation Instructions Figure 93. Removing the front panel board Note:...

  • Page 159: Replacing The Riser Card Assembly 1

    Figure 94. Installing the front panel board What to do next: Replacing the riser card assembly 1 Attention: Notes:...
  • Page 160 Rack Installation Instructions Figure 95. Lifting the riser card assembly 1 off the chassis...

  • Page 161: Replacing The System Board Battery

    Note: Figure 96. Installing the riser card assembly 1 What to do next: Replacing the system board battery Attention:...
  • Page 162 DANGER Danger of explosion if battery is incorrectly replaced. When replacing the lithium coin cell battery, use only the same or an equivalent type that is recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.

  • Page 163: Replacing The System Board

    Figure 97. Removing the system board battery Figure 98. Installing the system board battery What to do next: Replacing the system board Attention: Note: CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
  • Page 164 CAUTION: The heat sink(s) and microprocessor(s) might be very hot. Turn off the server and wait three to five minutes to let the server cool before removing the server cover. Note: Rack Installation Instructions Figure 99. Removing the two system fan cages with system fans...
  • Page 165 Figure 100. Removing the screws that secure the system board...
  • Page 166 Note: Figure 101. Removing the system board Figure 102. Installing the new system board...
  • Page 167 Figure 103. Installing the screws to secure the system board Note:...
  • Page 168 Figure 104. Installing the microprocessor socket cover Figure 105. Securing the microprocessor retainer...

  • Page 169: Completing The Parts Replacement

    Figure 106. Installing the two system fan cages with system fans What to do next: Note: Completing the parts replacement...
  • Page 170 Reinstalling the server cover and reconnecting cables Attention: Attention: Note:...
  • Page 171 Figure 107. Cable routing for server models with 3.5-inch hard disk drives...
  • Page 172 Figure 108. Cable routing for server models with 2.5-inch hard disk drives...
  • Page 173 Figure 109. Installing the server cover Figure 110. Closing the server cover completely Rack Installation Instructions...
  • Page 174 Attention: Note: Updating the server configuration...
  • Page 175 Chapter 7. Troubleshooting and diagnostics Troubleshooting procedure Viewing the status and diagnostic LEDs...
  • Page 176 Using a diagnostic program Continue Accept Viewing the system event log ThinkServer Management Module User Guide Basic troubleshooting tables ThinkServer EasyStartup program problems Note:...

  • Page 177: Optical Drive Problems

    Symptom Action ThinkServer EasyStartup ThinkServer EasyStartup Optical drive problems Notes: Action Symptom...

  • Page 178: Hard Disk Drive Problems

    Symptom Action Hard disk drive problems Notes: Symptom Action...

  • Page 179: Memory Module Problems

    Symptom Action Memory module problems Notes: Symptom Action...
  • Page 180 Symptom Action Keyboard, mouse, and USB device problems Symptom Action...
  • Page 181 Chapter 8. Getting information, help, and service Information resources Using the documentation User Guide ThinkServer Web site Lenovo Support Web site...

  • Page 182: Help And Service

    Help and service Before you call Calling for service Problem determination Hardware repair Engineering Change management...
  • Page 183 Warranty and Support Information Using other services Warranty Purchasing additional services...

  • Page 185: Appendix A. Notices

    Appendix A. Notices Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing...
  • Page 186 Trademarks Important notes Particulate contamination Attention:...

  • Page 187: Recycling Information

    Table 6. Limits for particulates and gases Contaminant Limits Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size Environmental conditions for process measurement and control systems: Airborne contaminants Polyvinyl Chloride (PVC) cable and cord notice WARNING: Wash hands after handling Recycling information Battery return program...
  • Page 188 Battery recycling information for the European Union Notice: Requirement for batteries containing perchlorate Important WEEE information...
  • Page 189 German Ordinance for Work gloss statement Export classification notice Electronic emission notices User Guide ENERGY STAR model information...

  • Page 191: Index

    Index...

Table of Contents