Table of Contents
Advertisement
Chapter 5. Installation
*The specialist from Head Office or Local distributor should carry out installation work.
* Installation works carried out by unauthorized person can cause out of order,
performance failure Electric shock.
5.1 Overview
• Proper installation of Radar ensures the performance and safety of it during
operation and facilitates the maintenance and repair of it, you should carefully pay
attention to the proper of installation accoding to the instruction.
• Antenna should be installed as high as possible after considering its weight.
• Indicator should be installed inside Wheel House in order make observation
efficiently.
• 15m standard cable should be used between Antenna and Indicator.
5.2 Installation of Antenna
5.2.1 Selection of the installation place
※ The place where there is no big obstructions on the level of ship's fore and afterside.
※ If there is a obstacle on the same level of Antenna, it may cause a virtual image.
※ Especially when the virtural image appears on ship's fore and after side, it will be
difficult to observe and hardly forecast the danger.
※ The place where there is a near Funnel can cause the decrease in performance, the
defect dueto haet, therefore it should be installed away from such Funnel as far as
possible.
※ Please keep in mind that Direction finding Antenna and VHF antenna should be far
away from Radar Antenna.
(Please avoid the situation from tying up said cables with Radar one)
CAUTION
!
Caution
!
40
Hide quick links:
Advertisement
Table of Contents
