3. Measurement of the distance and bearing by using F EBL/VRM
Press the F EBL/VRM key.
EBL/VRM will appear on the radar screen.
Once the cursor is appeared, move to the desired position.
By pressing Center Movement key, the center of F EBL/VRM will be shifted and
will be back to the original position by repressing the key.
By pressing cursor, cursor will be disappeared and then use the direction key
to move EBL/VRM to the desired position.
The value of distance and bearing will appear on the bottom end of the
screen..
To exit, press the esc key.
[Ref] F EBL/VRM can be used to indicate EBL/VRM on the specified position.
4. Measurement of the distance and bearing by using Cursor
By using Cursor, cross shaped cursor will be appeared on the radar screen.
The value of distance and bearing will appear at the bottom end of the
screen,where the cursor is located.
3.3.14 To change the distance uni
1. NM (Nautical Mile)
Menu System Distance unit Input NM Input Esc
Cursor, VRM, Distance of parallel line represents NM.
2. Mile
Menu Sytem Distance unit Input Mi Input Esc
Cursor, VRM, Distance of parallel line represents Mi
3. Kilometer (Km)
Menu System Distance unit Input KM Input Esc
Cursor, VRM, Distance of parallel line represents KM.
29