To Operate The Alert Function - Samyung SMR-3700 User Manual

3.3.7 To operate the alert function


the guide zone in order to use the alert.
Set
 Guard Zone means [Zone] to be set on PPI screen
1. Guard Zone Setting
 Locate the cursor where you want to move
 Press the Alert key
 POP-UP Menu will be appeared to set up two different guide zones on the
screen
 Select incursion or separation of guide zone.
 Incursion means the target enters into the zone and sepatation means the
target come out of the zone. In each case, the alert sound will come outt
 Select Ring or Fan
Ring function will create ring-shaped guide zone and Fan function will create
Fan-shaped guide zone.
 Press Adjust and then move the cursor to set up the guide zone.
 Press the input key.
 After a desired guide zone is done then exit
2. Occurrence and Stoppage of the alert sound
 After setting up the guide zone, the alert sound will come out once the target
enther into the zone.
 To stop the alert sound, press any key on the device.
3. Termination of the alert
 To terminate the alert status, press the alert key and then select the alert zone
off.
26