Panasonic SV-SR100 Operating Instructions Manual page 2

WARNING:
TO REDUCE THE RISK OF FIRE, ELEC-
TRIC SHOCK OR PRODUCT DAMAGE, DO
NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING
AND THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE
PLACED ON THE APPARATUS.
This product may receive radio interference caused
by mobile telephones during use. If such interference
is apparent, please increase separation between the
product and the mobile telephone.
For Europe, the U.S.A, and Canada
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES.
For other areas
THIS UNIT IS INTENDED FOR USE IN TROPICAL
CLIMATES.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.:
CAUTION:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable pro-
tection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment
and receiver.
≥Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
≥Consult the dealer or an experienced radio/TV
technician for help.
Any unauthorized changes or modifications to this
equipment would void the user's authority to operate
this device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause un-
desired operation.
2
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
CAUTION!
≥DO NOT INSTALL, OR PLACE THIS UNIT,
IN A BOOKCASE, BUILT-IN CABINET OR
IN ANOTHER CONFINED SPACE. EN-
SURE THE UNIT IS WELL VENTILATED.
TO PREVENT RISK
SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CUR-
TAINS AND ANY OTHER MATERIALS DO
NOT OBSTRUCT
VENTS.
≥DO NOT OBSTRUCT THE UNIT'S VENTI-
LATION OPENINGS
PERS, TABLECLOTHS, CURTAINS, AND
SIMILAR ITEMS.
≥DO NOT PLACE SOURCES OF NAKED
FLAMES, SUCH AS LIGHTED CANDLES,
ON THE UNIT.
≥DISPOSE OF BATTERIES IN AN ENVI-
RONMENTALLY FRIENDLY MANNER.
Marking sign is located on bottom of the unit.
For areas except Europe, the U.S.A. and
Canada
Make sure the voltage of the AC adaptor suits your
local voltage before plugging it into the household
AC outlet . If it doesn't, use a flat-headed screwdriver
to set the VOLTAGE ADJUSTOR to the voltage
corresponding to your area.
If the power supply in your area is 115 V or 120 V,
please set the VOLTAGE ADJUSTOR as follows:
For 115 V: set to 110 V
For 120 V: set to 127 V
VOLTAGE
ADJUSTOR
VOLTAGE
ADJUSTOR
110V
OF ELECTRIC
THE VENTILATION
WITH NEWSPA-
127V 220V-240V
OFF