JVC KD-G120 Service Manual page 11
Hide thumbs
Also See for KD-G120:
- Instructions manual (75 pages) ,
- Service manual (63 pages) ,
- Schematic diagrams (14 pages)
Table of Contents
Advertisement
3.1.4 Removing the side panel
(See Fig.4)
Reference:
Remove the front panel assembly as required.
(1) Remove the screw B and two screws C attaching the side
panel on the left side of the main body.
(2) Remove the side panel from the main body.
3.1.5 Removing the rear bracket
(See Fig.5)
• Remove the bottom cover.
(1) Remove the three screws D, three screws E and two
screws F attaching the rear bracket on the back side of the
main body.
(2) Remove the rear bracket.
3.1.6 Removing the main board
(See Figs.5 and 6)
• Remove the front panel assembly, bottom cover and side pan-
el.
Reference:
Remove the front chassis assembly as required.
(1) Remove the three screws D attaching the rear bracket on
the back side of the main body. (See Fig.5.)
(2) Remove the two screws G attaching the main board. (See
Fig.6.)
(3) Disconnect the connector
the main body and take out the main board with the rear
bracket. (See Fig.6.)
Reference:
Remove the rear bracket from the main body as required. (See
"3.1.5 Removing the rear bracket".)
CN501
on the main board from
B
C
Side panel
Fig.4
Rear bracket
E
D
Fig.5
CN501
G
Rear bracket
Fig.6
C
E
F
F
D
Main board
G
(No.MA233)1-11
Hide quick links:
Advertisement
Table of Contents
