Philips AT9 SERIES User Manual page 15

A
B
Note: If the shaving unit does not close smoothly, check if you have inserted
the shaving heads properly and if the retaining frame is locked.
5 sec.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service
or go to your Philips dealer. You can also contact the Philips Consumer
Care Centre in your country (see the worldwide guarantee leaflet for
contact details).
To retain the top performance of your shaver, make sure you clean it
regularly and replace its shaving heads at the recommended time.
Shaving heads
-
Cleaning
-
7 Put the retaining frame back into the shaving unit (A)and turn the
lock clockwise (B).
8 Insert the lug of the shaving unit into the slot in the top of the shaver.
Then close the shaving unit.
9 Press and hold the on/off button for 5 seconds to reset the
replacement reminder on the shaver. The orange light will go out.
We advise you to replace your shaving heads every two years. Always
replace with HQ9 (AT941/AT940) or HQ8(AT897/AT896/
AT894/AT891/AT890/AT889/AT887/AT886/AT872/AT811/
AT799/AT797/AT796/AT790/AT770/AT756/AT753/AT751/
AT750) Philips Shaving Heads.
Use Cleaning spray (HQ110) to clean the shaving heads thoroughly.
ENGLISH
15