Table of Contents
Advertisement
Troubleshooting
Symptoms
The CAMSBAR does not turn
on after the vehicle is started
and the vehicle is in reverse
Backup sensors keep sounding
The Monitor Stays on all the
time or runs when the vehicle
is not in reverse.
The monitor is very dark or
the image changes slowly
1. Check the wiring and connections
2. Check the fuse in the power harness
3. Check the power connection at the
reverse lamp
Clean the Bar with a soft cloth.
The system is not wired correctly. If the
system continues to operate while not in
reverse gear, re-check your wiring at the
reverse lamp.
In extreme cold or hot conditions, the LCD
screen may react slowly. This is normal and
will clear as the vehicle cools or warms to a
normal temperature.
11
Solutions
Advertisement
Table of Contents
