Operation; Playback; Making An Audio Recording - Pioneer a-10-k Operating Instructions Manual

Operation

Chapter 4:
Operation

Playback

SACD/CD player
Network audio player
N-50
NETWORK AUDIO PLAYER
/I STANDBY/ON
FUNCTION  
STANDBY PURE AUDIO Hi-Bit 32
 
iPod/USB
5V 2.1A
2 6
Playback
6 6
1 Turn on the power of the playback
component.
2 Turn power ON to the unit.
3 Select the source you want to playback.
Rotate the INPUT SELECTOR knob to select the playback
component.
iPod dock, etc
Turntable
CD recorder or
iPod
Music>
Extras> tape deck
Settings>
Shuffle Songs
Backlight
Tuner
MENU
 

Playback
5 3
4 Start playback of the component you
selected in step 1.
5 Adjust playback volume with VOLUME
control.
6 Adjust the tone to your preference using
the BASS and TREBLE controls, and
LOUDNESS button.
If the DIRECT button has been set to ON, these controls
are disabled.

Making an audio recording

You can make an audio recording from any audio source connected to the amplifier.
SACD/CD player
Network audio player
/I STANDBY/ON
STANDBY PURE AUDIO Hi-Bit 32
5V iPod/USB 2.1A
Audio recording component
(CD recorder, tape deck, etc.)
1 Select the source you want to record.
2 Start recording, then start playback of
the source component.
iPod dock, etc
Turntable
iPod
Music>
Extras>
Settings>
Shuffle Songs
Backlight
Tuner
MENU
NETWORK AUDIO PLAYER N-50  
FUNCTION  
  
Playback
Recording 1
04
9
En