Vehicle Checks - Chevrolet Beat Manual

104 Vehicle Care
not functional, e.g. anti-theft alarm
system.
Close the hood.
Putting back into operation
When the vehicle is to be put back into
operation:
Connect the clamp to the negative
terminal of the vehicle battery.
Activate the electronic of the power
windows.
Check tire pressure.
Fill up the washer fluid reservoir.
Check the engine oil level.
Check the coolant level.
Fit the number plate if necessary.
Radio Frequency Identification
(RFID) Tag
This vehicle is equipped with Radio
Frequency Identification (RFID) tag*,
which can be used for Electronic Toll
Collection (ETC) or any other applica-
tions as decided by the Regulatory
authority. The RFID tag is located on
inside the windshield. Data for necessary
applications will be added by the agency
authorized by the Regulatory authority,
from time to time. Take proper care dur-
ing washing or cleaning of windshield so
as to avoid any damage to the RFID tag.
In case of any damage or malfunction of
RFID tag, or in case of windshield
replacement, contact your CHEVROLET
retailer or agency authorized by the
Regulatory authority for the installation
of new RFID tag.
Caution
Do not touch or peel off. Do not place
any sticker or other metallic components
over the RFID tag neither from inside
nor from outside of the windshield.
Avoid exposure to chemicals or liquid
solvents. This will impair the function of
RFID tag. The RFID tag is tamperproof
and will not function once removed
from windshield.

VEHICLE CHECKS

Doing Your Own Service Work
Warning
Only perform engine compartment
checks when the ignition is off.
The cooling fan may start operating
even if the ignition is off.
Warning
The ignition system uses extremely
high voltage. Do not touch.