Heating; Manual Single Stage Heating; Manual2 Or 3 Stage Heating - Panasonic NE-1064 Operating Instructions Manual

How to Operate
i;,;:i1t'2'g'
HEATING
Open the door and place food in the oven cavity. Close the door. "0" must be showing in the display window.
A. Manual Single Stage Heating:
This feature gives the user maximum flexibility to set the oven to desired heating
' @
time and power level.
ldeal for menus that require various heating requirements.
Example: To heat for 2 minutes at High Power
2 [Er,T]-l tU:.: CT_-l [ErrT,:l
.Press the Power Level Selector
Pad one time.
.Press the Memory Pads 2, 0 and 0.
.Press the START Pad.
Heating will start.
The time on digital display will
count down.
4. Beep tone will sound.
.All heating wiil stop.
When opening the door, the
[----.;;l
display willstop blinkins.
|
.U. J
B. Manual2 or 3 Stage Heating:
This feature allows you to set to begin heating at one power level then shift automatically to a different
power level after the designated amount of heating time.
Example: To heat for 2 minutes at Defrost Power tor 2nd stage heating
For Stage 1 cooking
1. Follow steps 1 and 2 above.
D i s p l a y W i n d o w
t l
F rc-l
[ / s e j
For Stage 2 cooking
1rffia
(.LEvlt
4. Beeo tone will sound.
(See page 16)
NOTE:
.Press the Power Level Selector
Pad 3 times. Indicator will change
each time the pad is pressed. DEF
is now displayed. Stage 2 is
blinking.
.Press the Memory Pads2,0 and O.
.Press the START Pad.
The total time for both stages will be
displayed. The Active Stage "1" and
the Power Level"Hl" blinks. The oven
lamp will be turned on. Heating will
start.
.The total time will display and count
down.
.When oven shifts to the next stage, a
single beep tone will sound. The
Active Stage "2" and the Power Level
"DEF" blink.
.Allheating will stop.
When opening the door, the display
willstop blinking.
Display Window
t - - ' l
l l
-,,,-,,,---r,
!-,
I P O q I
@rl,: ErrTt-l fmTD
' @
For a 3 stage heating cycle, select a power level again and set the cooking time (steps 1 and 2 above).
SPECfAL NOTE: For both single and 2 or 3 stage heating.
1. While heating, one touch on the STOP/RESET Pad stops the oven. You can restart by pressing the START
Pad or a second touch on the STOP/RESET Pad will cancelthe selected program.
2. One touch on the STOP/RESET Pad, before the heating cycle is started, will cancelthe selected program.
- 9 -