Other Features; To Activate Program Lock; T O R E L E A S E P R O G R A M L O C - Panasonic NE-1064 Operating Instructions Manual

How to Operate
Other Features
A. To Activate Program Lock:
This procedure "Locks"lhe controlpanelMemory
Pads into their programmed heating times
levels. Do Nor OPEN THE DooR. The Display window must be btink before the
Program Lock feature can be activated.
' @
.Press and hold in the PROG pad
until the display shows "P" and "L".
(for 6 seconds)
.Program Lock feature is now
activated.
NoTE: 'Do
1ot press PROG Pad for longer than 30 seconds continuously, or false failure code may result.
.ln "Program Lock"
a. To activate preset programs, open door will display,'0".
b. The oven is started by pressing the desired Memory pad. There is no need to press the START
pad.
c. The interrupt feature is deactivated-opening the door cancels the remaining time on the
program.
d. The oven cannot be programmed until the program lock feature is deactivated.
B. To Release Program Lock:
This procedure deactivates "Program Lock" and activates all other features. Oven reverts to
a 2 touch
operating mode (Memory pad plus START pad).
DO NOT OPEN THE DOOR. The Display Window must be blank before the Retease
AispUv-Wingslu
Program Lock feature can be activated.
i i
NoTE: 'Do not press PRoG Pad for longer than 30 seconds continuously, or false failure code may result
.ln "Program Unlock,'
a. Repeat and interrupt features are operational.
b.lr/emory pads can be programmed.
c. Tone loudness control is operational.
ano power
Oisolay Window
l l
Fn-r
[ '
-
|
.Press the STOp/RESET pad and
while pressing this pad, press the
PROG Pad untitthe disptay shows
"P" (for
6 seconds).
.Program Lock Feature is deactivated.
oven is now in "Program Unlock" mode.
- 1 4 -