Setting The Time - Panasonic RR-US750 Operating Instructions Manual

Setting the time

After the battery is inserted, "
purchase). (After approx. 1 minute, the display changes to "
The clock is used for preserving recording date and setting timer recording. Please set the time first.
Recording is possible even if the clock is not set. However, the Recording date, Recording start time is displayed as "
When "
•FOLDER/ − MENU
• Switch Hold off ( ➜ page 6).
STOP
Press +, – to set the year and
1
press q / g to enter.
Set month and day in the same way.
Year
Press u , i to select the time
2
display and press q / g to enter.
24-hour display
Press +, – to set the time and
3
press q / g to enter.
You can adjust the time quickly by
pressing and holding +, –.
24-hour display
" blinks on the display when the time is not set (e.g. at the time of
" is blinking
M
M D
Month Day
12-hour display
12-hour display
" (blinking) in Hold off condition.)
When the time display is
" " (blinking) or you
change the time
• Switch Hold off ( ➜ page 6).
• Press to stop the unit.
STOP
1. Press and hold
D
menu screen is displayed.
" " (blinking) or "
is displayed.
2. Press +, – to select year display
" **" and press q / g to enter.
If " " blinks, press q / g to enter.
3. Follow step 1
* Press to stop the setting process
STOP
midway.
* The clock operates with the monthly
loss/gain of 60 seconds at nor mal
temperature.
* The time setting is cleared, if the battery
has been consumed completely.
".
•FOLDER/ − − MENU
until the
" (blinking)
, 2 and 3 shown at left.
7