Timer Recording - Panasonic RR-US750 Operating Instructions Manual

Timer recording

Timer Recording can be set to make one recording at a specified time on this unit. A recording automatically
starts at the start time and ends at the finish time.
•FOLDER/ − MENU
Recording
indicator
STOP
16
• Set the time beforehand ( ➜ page 7).
• Select the folder for recording and recording position ( ➜ pages 8, 9).
• Press to stop the unit.
STOP
1
Press and hold
the menu screen is displayed.
" "(blinking) is displayed.
Press +, – to select " " and
2
press q / g to enter.
Press u , i to select " "
3
and press q / g to
enter.
Press +, – to select the start
4
time and press q / g to enter.
Set the finish time in the same way.
(If the recording finish time is not set,
you cannot set timer recording.)
ON (Start time)
" " is displayed after the timer recording is set.
Timer recording is cancelled if the unit is used for
•FOLDER/ − − MENU
until
playback or another operation 30 seconds before
the starting time. After setting the timer, press
STOP
Confirming the timer set:
Perform step
Cancelling Timer recording:
Select "
*
*
*
*
*
OFF (Finish time)
*
to keep the unit stopped or off for standby.
1 , 2 and
" in step and enter.
3
Press to stop the setting process midway.
STOP
The recording time cannot be set more
than 24 hours ahead of the current time.
Maximum recording time that can be set by Timer
recording function is 8 hours. (When only 4 hours of
memory remain, maximum recording time is 4 hours.)
The unit automatically turns on for preparation 30
seconds before the recording start time, then " " and
the Recording indicator blink. The unit does not accept
key operations for this 30 seconds. At the start time, the
recording indicator lights up and timer recording starts.
You can stop the recording while Timer recording is
in progress, but you cannot pause the recording.
Timer recording setting is cancelled once timer recording is finished.
3 .