Advertisement
Provisioning Fanvil Phones via PnP
Before provisioning the phones, you must reset the phones to factory defaults in case
that the phones have residual settings of a previous configurations.
1. Connect the phone to the same network with Yeastar S-Series PBX. The phone
will send a PnP request to the PBX when booting up.
2. Log in Yeastar S-Series Web interface, go to "Auto Provisioning" App. Click "Scan",
all the phones in the local network will show up on the page.
3. Search the phone by MAC address or IP address, and click "edit".
4. Choose the phone Model, active a line and assign an extension for the phone.
You can also configure keys, features, preferences and codec for the phone.
5. Click "Save".
6. The system prompts you to reboot the phone, click "OK".
7. Reboot the phone manually, the phone will restart, then reboot again to apply the
configurations automatically.
Fanvil IP Phone Configuration Guide
5/8
Advertisement
