Panasonic CF-W2 Series XP Operating Instructions Manual page 70

Hard Disk Data Erase Utility
70
The computer will restart.
Press the F2 key while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
Set the Product Recovery DVD-ROM, and execute step D.
D Press the F10 key.
At the confirmation message, select [Yes] and press the Enter key.
The Setup Utility will close, and the computer will restart.
If [Enter Password] is displayed during the following procedure, enter the
Supervisor Password or User Password.
E When the message "Select a number" is displayed, press the 2 key and
perform [2. [Erase HDD]].
(You can cancel this operation by pressing the 0 key.)
The confirmation message will be displayed.
F Press the Y key.
Hard Disk Data Erase Utility will start.
(All of the screens below are only examples.)
G When [<<<Start menu>>>] is displayed, press the Enter key.
H The approximate time required for erasing data will be displayed.
Press the Space key.
I At the confirmation message, press the Enter key.
The operation of erasing the hard disk starts.
If necessary, the "hard disk data erase" operation can be cancelled
after it has begun by pressing the Ctrl+C key.
If the operation is cancelled before being completed, a part of data will
not be erased.