Panasonic CF-W2 Series XP Operating Instructions Manual page 61

5
Setup Windows. (
6
Run the Setup Utility and change the settings where neces-
sary.
(The Setup Utility settings will return to their default values. Even the security
settings with the exception of the password(s), date and time will return to
their default values.)
7
If you can connect to the Internet, perform Windows
Update.
( "Chapter 8: To Update this Computer to its Latest Version" in onscreen
Reference Manual)
Changing the drive letter
You can change the drive letter for the DVD-ROM & CD-R/RW drive or hard disk drive
by the following steps.
The C: drive cannot be changed.
DVD-ROM & CD-R/RW drive is the D: drive at the time of factory shipment.
We recommend that you make these changes before installing applications.
A Click [start] - [Control Panel] - [Performance and Maintenance] - [Admin-
istrative Tools] and double click [Computer Management].
B Click [Disk Management] from [Storage].
C Right click on the partition of the hard disk or the name of the DVD-ROM &
CD-R/RW drive and click [Change Drive Letter and Paths...].
D Click [Change].
E Click [Assign the following drive letter] and select the new drive letter, and
then click [OK].
F At the confirmation message, click [Yes].
page 19)
61