Boot Menu - Panasonic CF-W2 Series XP Operating Instructions Manual

Setup Utility

Boot Menu

36
Set priorities (displayed in order from top to bottom) for devices that start up the operat-
ing system.
To move a device up by one in the order, select the device with the
key, and then press the F6 key.
To move a device down by one in the order, select the device with the
key, and then press the F5 key.
Panasonic USB floppy disk drive (CF-VFDU03 (optional)) can be used for startup
(recommended).
*1*2
+Floppy Drive
*2
+Hard Disk Drive
CD/DVD Drive
LAN
*1
A "+" will not be displayed if a floppy disk drive is not connected.
*2
When you select an item with a "+" display and press the
nected device (including internal devices) will be displayed. (Press the
more to return the display to its original condition.)
Ctrl Enter
Press the +
disk drive.
NOTE
When [CD/DVD Drive Power] is set to [Off] in [Main] menu, startup cannot be
executed from DVD-ROM & CD-R/RW drive (item name CD/DVD drive). The
disk cover cannot be opened until Windows has started.
The [Boot] menu cannot be changed when the Setup Utility is started up with
the User Password.
Boot Menu
The device for starting up the operating system can also be selected during
computer start-up. After the computer is turned on and the Esc key is pressed
at [Panasonic] boot screen, [Boot Menu] (the device selection screen) will
appear. When the [Boot] menu setting is changed, the selection screen display
will also change. [Boot Menu] is displayed only when [Boot First Menu] in the
[Security] menu is set to [Enable].
key to display the names of both the floppy disk drive and the hard
key and the
key and the
Enter
key, the name of the con-
Enter
key once