General Information - techem radio frequency smoke alarm 2 Operating Instructions Manual

20
Brief overview: What to do if ...
In the following table we introduce you to important smoke alarm
signals and explain how you should behave in the different situa-
tions. – All steps are explained in detail later (see column 4: What must
I do next?).
Signal tones
Loud alarm tone
2 short, quiet
signal tones
every 10 minutes
3 short, quiet
signal tones
every 5 minutes
General information
Product description / intended use
The Techem radio frequency smoke alarm 2 is used to recognise fires
early and for local acoustic alerting in the private area and in the housing
industry. – It is not suitable for applications above and beyond this.
The radio frequency smoke alarm 2 operates using a tested, permanent-
ly integrated long-term lithium battery. – It can be muted by pressing
the user key.
Techem radio frequency smoke alarm 2 – operating instructions
Optical display
Red LED flashes
every 2 seconds
Red LED flashes
2x every
30 seconds
Red LED flashes
1x every
5 seconds
Deactivate
signal tones
Press the user
key
Press the user
key
Press the user
key
What must I
do next?
See page 22:
Alerting
See page 29:
Environmen-
tal monito-
ring
See page 30:
Defect/
damage