Panasonic CQ-C7703N Operating Instructions Manual page 9

Function Setting
Adjustment to display on the FUNCTION menu
Up to 6 stations can be preset in AM (LW/MW), FM1, The display changes as follows every time [D] (DISP:
Open/Eject
1
Press [MENU] to display the menu dis-
Number Buttons
FM2, and FM3 respectively. DISPLAY) is pressed.
play.
Note: The graphic pattern and still image are selectable.
Preset stations can be simply called up by pressing [}]
Press [u ] (OPEN).
–
(a page 32)
(P·SET) or [{] (P·SET).
0
For using the remote
When a disc is already loaded, the disc will automatically
Notes: control, hold down
be ejected.
[SEL] (MENU) for 2
¡ Direct selection can be executed with [1] to [6] but-
At power-on:
#
Number
sec. or more.
tons on remote control.
NUMBER
¡ You can switch between 6 and 18 for FM presetting
RANDOM stations. (EACH BAND/ALL BAND)
RANDOM
4
2
Press [
Auto Preset Memory (APM)
TION menu.
SCAN
Stations with good receiving conditions automatically SCAN
5
Cautions:
preset.
1
¡ To avoid damaging the face plate, do not push it
Select a band.
REPEAT REPEAT
Folder hierarchy (MP3/WMA mode only.)
6
down or place objects on it while it is open.
2
¡ Do not pinch your finger or hand in the face plate. Hold down
¡ Do not insert foreign objects into the disc slots.
[BAND] (APM)
7 9
¡ For the following cases, the face plate automatical-
3
for 2 sec. or
Press [
TUNE
ly closes. Use caution not to catch your finger.
more.
TRACK (FILE)
be adjusted.
After a lapse of 20 seconds
¡
Ordinary display + graphic pattern
¡ When a disc is inserted
The preset stations under best receiving conditions
¡ When the face plate is removed
8
are received for 5 sec. each after presetting the sta-
When the power is set to off (at ACC-off)
¡
tions (SCAN). To stop scanning, press [}] or [{].
0
Notes:
P·SET (Preset)
4
Press [BAND]
Close
¡ New stations overwrite existing saved stations.
DISC (FOLDER)
(SET) to adjust.
¡ Only RDS stations will be saved at default setting (AF ON).
Press [u ] (OPEN).
To select non RDS stations too, set AF OFF.
5
Although most of the functions of this unit are executable
Press [MENU] to confirm the adjust-
with both the main unit and remote control, the following
ment.
functions are excluded.
Up
For using the remote control, hold down [SEL]
Only LOCAL is available while receiving an AM station.
w Down
(MENU) for 2 sec. or more.
1
Note: The Spectrum Analyzer equalizer of 19 bands
Press [MENU] to display the menu dis-
Operations executable only with main unit
(S.A.) is selectable when selecting a graphic pattern.
play.
Setting Range: 0 to 40
¡ Face panel's opening, closing, tilting, and removal
Default: 18
For using the remote
actions (a
control, hold down
¡ Disc ejection
[SEL](MENU) for 2
¡ SRS WOW on, off, and adjustment
sec. or more.
SQ on, off, and adjustment
¡
AF ON/OFF
¡
¡ TA ON/OFF
2
Press [
Operations executable only with remote control Volume off (down)
adjusted.
¡Preset station calling with one-touch operation
Press [MUTE].
(a page 19)
Direct access to tracks on CDs
¡
¡ Random and repeat play with one-touch operation
3
Press [BAND]
(a page 25, 27)
Cancel
(SET) to adjust.
¡ Scan playback
PI seek (a
¡
4
Press [MUTE] again.
Press [MENU] to confirm the adjust-
ment.
Note: Volume-down range can be specified.
For using the remote control, hold down [SEL]
(a page 31)
(MENU) for 2 sec. or more.
Downloaded from Caradio-Manual.com Manuals Downloaded from Caradio-Manual.com Manuals Downloaded from Caradio-Manual.com Manuals Downloaded from Caradio-Manual.com Manuals Downloaded from Caradio-Manual.com Manuals
0 to 9
9
POWER
SRC (SOURCE)
Mode
] [
] or [ ] to display the FUNC-
BAND
Pause/Play
SET
Auto Preset
APM
Memory
} {
] or [ ] to select a function to
(a
Only graphic pattern
page 13)
(a page 13)
(a
(a page 17)
(a page 21)
(a page 22)
} {
] or [ ] to select a mode to be
(a page 25, 27)
(a page 25, 27)
page 21)
MUTE KEY Manual station preset
1
Setting [MUTE] buttons' functions
Tune in to a station.
2
Hold down
SEL Select
more.
MENU
3
Select a preset number by pressing
Display OFF
or
[{]
EXT.MUTE (External Mute)
All displays disappear in 5 seconds.
POWER
SOURCE
Note:If [BAND] is pressed while receiving an FM
Volume adjustment when an interruption such as car
SRC SRC SRC
Tilt
station, FM broadcasting is changeable among FM 1
navigation signal occurs
SET
to FM 3.
The display angle changes among 4 levels as follows
BAND BAND BAND
4
Hold down [BAND] (SET) for 2 sec. or
every time you hold down [u ] (TILT) for 1 sec. or
1 1
more and release. more to determine the selection.
Ordinary display + clock
RANDOM
4 4
Notes:
7 7
: No change in volume
¡ In step 2, a station can be registered by holding down
TUNE
the numeric button [1] to [6] for 2 sec. or more. # #
NUMBER
¡ To stop presetting stations, press
PLAY ).
The operation above allows users to replace the cur-
¡
page 12)
CAR AUDIO
rent station with the station preset in the selected
number while selecting a preset station.
Note: The last selected
angle is memorized even
SECURITY
after turning off the power.
Ordinary display + still image
(a page 21)
Setting the security function
: ON (default)
: OFF
Notes:
¡ The volume level can be set independently for each
ACC At power-off:
source. (For radio, one volume setting for AM
Setting depending on your car Note: The clock appears only at ACC on setting.
(LW/MW), one volume setting for all FMs)
: ACC not equipped (default)
¡ The volume is not adjustable while an error display is
Clock display (default)
MONO (Monaural)
on the monitor.
: ACC equipped
page 16) This unit memorizes individual volume levels for each
¡
Noise reduction when the signal strength decreases
source. Make volume adjustments of each source
: Receiving in stereo (default)
Caution
appropriately to prevent large volume fluctuation when
the source is changed. : Receiving in mono and reducing the noise level
Be sure to select OFF when your car has no
Off
ACC position in the ignition switch. Failure
LOCAL
to do this could cause the battery to go
dead.
Setting when searching for a station
: Searching even for a relatively low-intensity radio
BUILT-IN AMP
wave station (default)
: Searching only for a high-intensity radio wave
You can toggle the integrated amplifier on and off.
station
: Amplifier on (default)
: Amplifier off (when the external amplifier is used)
PRESET
Preset range for FM bands
CQ-C7703N/C7303N
: Volume off (default)
or for 2 sec. or
[}] [{]
VOL Volume
: Volume down by 10 steps
}:Up
{:Down
: Volume down by 5 steps
.
MENU
SEL SEL SEL
VOL VOL VOL
MUTE MUTE MUTE : Volume off (default)
MUTE
2 2 3 3 SBC-SW Super Bass
: Volume down by 10 steps
SCAN REPEAT
Control-Subwoofer
5 5 6 6
: Volume down by 5 steps
9 9
8 8
TUNE
0 0
DISP DISP DISP Display
(External muting display)
[D]
Only still image
(a page 11)
(a page 41)
: Setting of FM1–3 together (default)
: Individual setting for FM1–3 each
Lights when disactivated.
[}]
DISP: DIS-
(
TILT 1
TILT 2
TILT 3
OPEN
TILT OFF
31 19 15 13 9