Seat - BMW F700 gs Rider's Manual

Headlight beam throw and
spring preload
Headlight beam throw is gener-
ally kept constant when spring
preload is adjusted to suit load.
Spring preload adjustment might
not suffice only if the motorcycle
is very heavily loaded. Under
these circumstances, headlight
beam throw has to be adjusted
to suit the weight carried by the
motorcycle.
If there are doubts about
the correct headlight range,
seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Adjusting headlight beam
throw
Slacken screws 1 on left and
right.
Adjust beam throw by tilting
the headlight slightly about its
horizontal axis.
Tighten screws 1 on left and
right.
Beam-throw basic setting
Slacken screws 1 on left and
right.
Tilt the headlight slightly
about its horizontal axis until
arrowhead 2 is pointing toward
marker 3.
Tighten screws 1 on left and
right.

Seat

Removing seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
4
51
z