Honeywell HZC-755N/P Series Operation Manual page 13

② LOW SHUTTER Speed
: In Shutter Fix,Manual Mode, range is from 1/30 sec (2 fields)
to 2 sec (128 fields).
LOW SHUTTER 2 FLDS ~ 128FLDS
(FLDS means how many times integrated of CCD signal.)
③ HIGH SHUTTER Speed
: In Shutter Fix,Manual Mode, range is from 1/60 sec to
1/10,000 sec.
1/60 → 1/100 → . . . . → 1/10000
HIGH SHUTTER
④ IRIS
: In Iris Fix, Manual Mode, range is 17 phases from F1.6
(full Open) to CLOSE.
CLOSE → F22 → F19 → . . . . → F1.6
IRIS
⑤ GAIN
: In Gain Fix, Manual Mode, range is 17 phases from 8 to 40dB.
8dB → 10dB → . . . . → 38dB
GAIN
⑥ Brightness
: Adjust level of Auto Iris. The smaller brightness value is, the darker it is,
because iris is closed more. On the contrary the bigger brightness value
is, the brighter it is, because iris is opened more.
BRIGHTNESS 0 ~ 99
⑦ MAX AGC
: Adjust Max AGC level.
8dB → 10dB → . . . . → 38dB
MAX GAIN
☞caution
1. Max Gain is less than 20dB, and Field Integration does not work.
⑧ MAX FIELDS (option)
: Use for compensating the low illumination condition. In case that use this
function because of low illumination condition, adjust maximum integration
fields to get brighter and dynamical image. But the scene becomes slower
than OFF mode. The larger max fields is, simultaneously the noise of
image is larger. This is phenomenon because too small video output is
integrated on many fields memory. To get more dynamical image, adjust
maximum integration fields and set maximum AGC gain as HIGH, then
make better the standard of dynamic image.
OFF → 2FLDS → 4FLDS → 8FLDS → 10FLDS
MAX FLDS
→ 12FLDS → 16FLDS → 24FLDS → 32FLDS
→ 48FLDS → 64FLDS→ 96FLDS -> 128FLDS
☞caution
1. In Fields Integration mode, noises as well as video information are
increased. When an ambient temperature keeps high, CCD pixel
defect happens to be larger and white. This is not due to failure.
<< WB MODE >>
① MODE
② CONTROL
③ RED GAIN
④ BLUE GAIN
RETURN
<Fig5-6. White Balance Mode >
5.7 White Balance Mode
① White Balance Mode
: Outer illumination condition is expressed by Color temperature ,Kelvin
(°K). It is White Balance that shows white as white in any illumination
conditions. It is composed of five modes..
ATW ( Auto Trace White balance )
: Trace automatically under any condition in range 2,800°K ~ 8,000°K
( It can be adjustable red and blue point of desired white position. )
INDOOR
: Use to set the preset illumination condition as 3200°K
OUTDOOR
: Use to set the preset illumination condition as 5400°K
MANUAL
: Use to adjust to desired color temperature manually(0 ~ 99 decimal )
AWC
: Consider current illumination condition, do white balance by force
and lock as manual
② White Balance Mode Control
: It displays and changes White Balance Mode Control status of Camera.
( According to Mode, it just display the state and not to adjust.)
ATW AUTO
INDOOR 3200°K
OUTDOOR 5400°K
MANUAL R/B CONT
LOCK → PUSH → . . . .
AWC
AWC AUTO
(LOCK means Manual white balance status. Press NEAR(+) / FAR(-)
key continuously, LOCK mode becomes PUSH mode and white balance
acts automatically, and then white balance mode is locked as manual.)
- 13 -
ATW
AUTO
-1
2