Replacing The Bulb - Russell Hobbs RH50FF144 Instruction Manual

Replacing the Bulb

1. Unplug the appliance from the mains.
2. Locate the lamp cover which is on the rear of the temperature control panel
that is at the top of the refrigeration compartment.
3. Unclip the cover on either side by using a flat headed screw driver and lift the
cover away from the control panel.
Clips
4. Replace the bulb with a new one, maximum 10W and clip the lamp cover back
on.
5. Check the temperature control knob has not been accidentally altered.
6. After 5 minutes, plug the appliance in to the mains.
If you have any problems with this procedure please call the service team on 0345
208 8750.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
.
or visit us at www.productcare.co.uk
13