Table of Contents
Advertisement
NOTE
For more information on the sensor see
"Remote Sensor THN122N" Section.
MINIMUM / MAXIMUM RECORDS
The MEM button is located in the main unit battery
compartment. Press MEM to toggle between current,
maximum (MAX) and minimum (MIN) records. To clear
the records, press and hold MEM for 2 seconds. A beep
will sound to confirm that the memory has been cleared.
RESET SYSTEM
The RESET button is located in the main unit battery
compartment. Press RESET when you change the
batteries and whenever performance is not behaving
as expected (for example, unable to establish radio
frequency link with remote sensor or Clock).
SAFETY & CARE
Clean the product with a slightly damp cloth and alcohol-
free, mild detergent. Avoid dropping the product or
placing it in a high-traffic location.
RAR621 English R2
WARNINGS
This product is designed to give you years of service if
handled properly. Oregon Scientific will not be
responsible for any deviations in the usage of the device
from those specified in the user instructions or any
unapproved alterations or repairs of the product.
Observe the following guidelines:
• Never immerse the product in water. This can
• Do not subject the main unit to extreme force,
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of
• Do not use rechargeable batteries with this
• Remove the batteries if storing this product for a
• Do not scratch the LCD display.
NOTE
contents of this user guide are subject to change without
notice. Images not drawn to scale.
12
12
cause electrical shock and damage the product.
shock, or fluctuations in temperature or humidity.
different types.
product.
long period of time.
The technical specification of this product and
7/27/04, 12:21 AM
Advertisement
Table of Contents
