Table of Contents
Advertisement
SET ALARM
1. Press
to display the type of Alarm you wish to
set: Weekday or Single.
2. Press and hold
again for 2 seconds. The Alarm
settings will blink.
3. Select the hour and minute. Press
settings. Press
To confirm.
ACTIVATE ALARM
Press
or
to activate or deactivate the Alarm. "-:--"
indicates that the alarm is deactivated.
RAR621 English R2
STOP ALARM
To stop the alarm from ringing, Press
TEMPERATURE
This product can display current, minimum, and
maximum temperature information collected by the
remote sensors and main (indoor) unit.
Outdoor data is collected and displayed every
78 seconds. Indoor data is collected and displayed every
10 seconds.
SELECT CHANNEL NUMBER
Press CHANNEL to switch between sensors 1-3.
The icon shows the selected sensor.
Kinetic-
wave icon
Designat-
or
to change
ed
Display
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL or MEM.
11
11
.
Indoor
Remote
Remote
Remote
Display
Display
Display
Display
Channel 1
Channel 2
Channel 3
7/27/04, 12:21 AM
Advertisement
Table of Contents
