Troubleshooting Guide - Panasonic SC-HT440 Operating Instructions Manual

Dvd home theater system
Table of Contents

Advertisement

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not
solve the problem, refer to "Customer Services Directory" on page 33 if you reside in the U.S.A., or refer to "Product information" on page 11 if you
reside in Canada. In other areas, consult your dealer.
Power
No power.
The unit is automatically switched
to standby mode.
Unresponsive or inoperable function
No response when any buttons
are pressed.
No response when remote control
buttons are pressed.
Cannot play DVDs.
No picture or sound.
You have forgotten your ratings
password.
Reset all the settings to Factory
Preset.
Specific operation undesirable or unexpected
It takes time before play starts.
[MP3]
Folders on a data CD are not
displayed correctly.
[WMA] [MP3] [JPEG]
A menu screen appears during
skip or search. [VCD]
Playback control menu does not
appear. [VCD] with playback control
Program and Random play do not
work. [DVD-V]
Selecting audio soundtrack "2"
does not change the audio. [DVD-A]
Play restarts from the beginning
when the soundtrack is changed.
[DVD-A]
Scenes are skipped intermittently.
[DVD-VR] [DVD-V]
Subtitle
Subtitle position is wrong.
No subtitles.
Subtitles overlap the closed
captions.
Marker
Cannot add markers.
A-B repeat
Point B is automatically set.
Sound abnormal or improper
Sound is distorted.
Effects do not work.
Humming is heard during play.
No sound
Menus
The Setup menu cannot be
accessed.
30
≥ Insert the AC power supply cord securely.
≥ The Sleep timer was working and had reached the set time limit.
≥ This unit cannot play discs other than the ones listed in these operating instructions.
≥ The unit may not be operating properly due to lightning, static electricity or some other external
factor. Turn the unit off and then back on. Alternatively, turn the unit off, disconnect the AC power
supply cord, and then reconnect it.
≥ Condensation has formed. Wait 1 to 2 hours for it to evaporate.
≥ Check that the batteries are installed correctly.
≥ The batteries are depleted. Replace them with new ones.
≥ Aim the remote control at the display and operate.
≥ CD Mode is on. Press and hold [—CD MODE] to turn CD Mode off.
≥ Check the video or speaker connection.
≥ Check the power or input setting of the connected equipment.
≥ Check that the disc has something recorded on it.
≥ While stopped and "DVD/CD" is the source, press and hold [∫] (Stop) on the main unit and [S10]
on the remote control until "Initialized" disappears from the television. Turn the unit off and on
again.
All settings will return to the default values.
≥ Play may take time to begin when an MP3 track has still picture data. Even after the track starts, the
correct play time will not be displayed. This is normal.
≥ Folders deeper than the eighth layer are displayed as the eighth layer.
≥ This is normal for Video CDs.
≥ Press [∫ STOP] twice and then press [1 PLAY].
≥ These functions do not work with some DVD-Videos.
≥ Even if a second soundtrack is not recorded, two numbers are normally shown.
≥ This is normal for DVD-Audio.
≥ If you change the volume or sound effects during Advanced Disc Review, the function continues
without the on-screen display. Cancel the function.
≥ Adjust the position. ("Subtitle Position" in Display Menu)
≥ Display the subtitles. ("Subtitle" in Main menu)
≥ Clear the subtitles.
≥ You cannot add markers with DVD-RAM.
≥ If the disc's elapsed play time does not appear on the unit's display, you cannot add markers.
≥ The end of an item becomes point B when it is reached.
≥ Noise may occur when playing WMA.
≥ Some audio effects do not work or have less effect with some discs.
≥ An AC power supply cord or fluorescent light is near the main unit. Keep other appliances and
cables away from the main unit.
≥ There may be a slight pause in sound when you change the play speed.
≥ Select "DVD/CD" as the source.
≥ Cancel Program and Random play.
Page
8
29
10
8
8
9
14
6, 7
19
20
18
18
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Saht440 - receiver

Table of Contents