Using The Radio; Presetting Stations Automatically - Panasonic SC-HT440 Operating Instructions Manual

Using the radio

Numbered
buttons
FUNCTIONS
-TUNE MODE / -FM MODE

Presetting stations automatically

M
ain unit only
Up to 15 stations can be set in each band, FM and AM.
1
Press [SELECTOR] to select "FM" or "AM".
2
Press [-TUNE MODE] to select "MANUAL".
Each time you press the button: MANUAL()PRESET
Press [X TUNING W] to tune to the lowest frequency
3
(FM: 87.9 or 87.5, AM: 520).
4
Press and hold [MEMORY].
Release the button when "FM AUTO" or "AM AUTO" is displayed.
The tuner presets all the stations it can receive into the channels in
ascending order.
≥ "SET OK" is displayed when the stations are set, and the radio
tunes to the last preset station.
≥ "ERROR" is displayed when automatic presetting is unsuccessful.
Preset the channels manually (➜ right).
24
TUNER/BAND
ENTER
MEMORY SELECTOR
TUNING
Selecting the preset channels
1
Press [TUNER/BAND] to select "FM" or "AM".
2
Press the numbered buttons to select the channel.
≥ To select a 2-digit number
e.g. 12: [S10] ➜ [1] ➜ [2]
Alternatively, press [X, W].
When a stereo FM broadcast is being received,
"ST" lights in the display.
∫ If noise is excessive
When "FM" is selected
Press and hold [—FM MODE] on the main unit to
display "MONO".
Press and hold [—FM MODE] again to cancel the mode.
≥ The mode is also canceled when you change the frequency.
When "AM" is selected
Press [FUNCTIONS] on the remote control.
Each time you press the button: BP 2()BP 1
Manual tuning
M
ain unit only
1
Press [SELECTOR] to select "FM" or "AM".
2
Press [-TUNE MODE] to select "MANUAL".
3 Press [X TUNING W] to select the frequency.
≥ To start automatic tuning, press and hold [X TUNING W] until the
frequency starts scrolling. Tuning stops when a station is found.
∫ Presetting the channel
Up to 15 stations can be set in each band, FM and AM.
1 While listening to the radio broadcast
Press [ENTER].
2 While the frequency and "PGM" are flashing on the display
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
e.g. To select 12:
[S10] ➜ [1] ➜ [2]
Alternatively, press [X, W], and then press [ENTER].
The station occupying a channel is erased if another station is
preset to that channel.
PRG DISC SFC TG D.MIX MONO SLP
DE
S
A AC
ST SRD E.
HDCD
H.BASS
PGM
W
1
MONO ST SRD E.
HDCD
H.BASS
PGM
W
1
DISC SFC TG D.MIX MONO SLP