Panasonic SC-HT440 Operating Instructions Manual page 22

Changing the player settings
QUICK SETUP enables successive settings of the items in the shaded area.
∫ "Video" tab
TV Aspect
Choose the setting to suit your
television and preference.
TV Type
Select to suit the type of television.
Time Delay
When connected with a Plasma
display, adjust if you notice the audio is
out of sync with the video.
Still Mode
Specify the type of picture shown
when paused.
Black Level Control
Change the black level of the picture if
you connected a television through the
COMPONENT VIDEO OUT terminals.
§
Refer to "Frame still and field still" (➜ page 11, Glossary).
∫ "Audio" tab
Dynamic Range Compression
Speaker Settings (➜ page 23)
Set the delay time for your center and
surround speakers.
∫ "Display" tab
Menu Language
On-Screen Messages
∫ "Others" tab
FL Dimmer
Change the brightness of the unit's
display.
QUICK SETUP
Re-initialize Setting
Return all values in the Setup menus
to the default settings.
22
≥ 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥ 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥ 16:9: Widescreen television (16:9)
≥ Standard (Direct View TV)
≥ Projection TV
≥ 0ms ≥ 20ms
≥ Automatic
≥ Field
§
: The picture is not blurred, but picture quality is lower.
≥ Frame
§
: Overall quality is high, but the picture may appear blurred.
≥ Lighter: When connected through VIDEO OUT or S-VIDEO OUT.
≥ Darker: When connected through COMPONENT VIDEO OUT (Y/P
≥ Off
≥ On: Adjusts for clarity even when the volume is low by compressing the range of the lowest sound level
and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)
≥ Center:
0.0/1.0/2.0/3.0/4.0/5.0 ms
≥ Surround (L/R):
0.0/5.0/10.0/15.0 ms
≥ English ≥ Français
≥ On ≥ Off
≥ Bright ≥ Dim
≥ Auto: The display is dimmed, but brightens when you perform some operations.
≥ Yes ≥ No
≥ Yes: The password screen is shown if "Ratings" (➜ page 21) is set. Please enter the same password.
After "INIT" on the display disappears, turn the unit off and on again.
≥ No
≥ CRT Projector
≥ Plasma TV
≥ 40ms ≥ 60ms
≥ Español
≥ LCD TV/Projector
≥ 80ms ≥ 100ms
/P ).
B R