HP NetServer E 45 User Manual page 46

Appendix B
Manufacturer's Name: Hewlett-Packard Company
Manufacturer's Address: 5301 Stevens Creek Blvd.
Santa Clara, CA 95052 USA
declares, that the product
Product Name: Network Server
Model Number(s): HP NetServer E 45
Product Options: All
conforms to the following Product Specifications:
Safety: IEC 950: 1991 + A1, A2, A3 / EN 60950: 1992 + A1, A2, A3
EMC: CISPR 22: 1993 / EN 55022; 1994 - Class B
EN 50082-1: 1992 - Generic Immunity
IEC 801-2: 1991, 4 kV CD, 8 kV AD
IEC 801-3: 1984, 3V/m
IEC 801-4: 1988, 0.5 kV Signal Lines, 1 kV Power Lines
FCC Title 47 CFR, Part 15, Class B
Supplementary Information:
1) The product was tested in a typical configuration with Hewlett-Packard peripherals.
2) Models were configured with a network interface board and shielded twisted-pair data cable.
3) The product complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause
undesired operation.
The product herewith complies with the requirements of the following directives and carries the CE marking
accordingly:
- EMC Directive 89/336/EEC
- Low Voltage Directive 73/23/EEC
Santa Clara, September 5, 1997
North American Contact:
Hewlett-Packard Company Product Regulations Manager
3000 Hanover Street
Palo Alto, CA 94304
415-857-1501
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH,
Department ZQ / Standards Europe, Herrenberger Straße 130, D-7030 Böblingen (FAX: + 49-7031-143143)
40
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Regulatory Information
Nigel Marrion / Quality Manager