D-Link xStack DGS-3610 Series Hardware Installation Manual page 15

DGS-3610 Series H/W Installation Guide
Table 1-4 LEDs on the Front Panel
Identification Applicable Model
 DGS-3610-26
 DGS-3610-26G
Status
 DGS-3610-50P
 DGS-3610-26
 DGS-3610-26G
RPS
 DGS-3610-50P
 DGS-3610-26
 DGS-3610-26G
Xe port LED
 DGS-3610-50P
 DGS-3610-26
 DGS-3610-26G
Console
 DGS-3610-50P
 DGS-3610-26
 DGS-3610-26G
RJ45 port
 DGS-3610-50P
 DGS-3610-26
 DGS-3610-26G
SFP port
 DGS-3610-50P
 DGS-3610-50P
MOD
 DGS-3610-50P
MOD-LED
Table 1-5 Descriptions of Port LED
Item
Port LED indicating switching
status
Description
System status LED
Redundancy power
LED
10G port LED
Management port
10/100/1000M adaptive
RJ45 port LED
1000M SFP optical
module port
LED indicator
Button for switching the
port LED indication
mode
Port mode LED
Status Description
Solid green 1000M LINK
Green flashing 1000M ACT
Solid orange 10/100M LINK
Chapter 1 Product Overview
Detailed Information
OFF: The switch is not powered on.
Flashing Green: The
initializing. If it keeps flashing, there is
a fault.
Solid Green: The switch is working
normally.
Solid Red: The switch is faulty.
OFF: The redundancy power supply is
not connected or not turned on.
Orange: The redundancy
supply is working.
Green: The redundancy power supply
is connected and is ready to supply
power.
Red: The redundancy power supply is
connected and cannot supply power.
There are two LEDs for each group of
Xe1 and Xe2 ports.
Yellow: The appropriate Xe port is
detecting the optical module.
Green/flashing: The appropriate Xe
port is in the LINK/ACT status.
The management port is connected to
the computer via the serial cable for
configuring this switch.
For the colors of the LED and their
meanings, see Table 1-5 Descriptions
of Port LED.
For the colors of the LED and their
meanings, see Table 1-5 Descriptions
of Port LED.
This button controls the port LED to
indicate the switching status or the
POE power status.
Off: switching mode
Green: POE mode
switch is
power
1-9