5、
ELECTRIC WORK
Lo
K
OFF
Hi
L
N
DOUBLE SPEED SWITCH WIRING DIACRAM
Optional door switch & weather proof cover
Save energy & eliminate unnecessary air circulation
COM – common
NO – normally open
NC – normally close
6、OPERATION
6.1 Turn on the power switch
6.2 Select the best speed:High[H] 、 Low[L]
6.3 According to the installation place to adjust the wind direction parts to obtain the best effect.
7、
CAUTIONS
a) 、 Use the unit at the rated voltage and frequency indicated on the nameplate.
b) 、 Disconnect power source before unit operation.
c) 、 Routing maintenance must be done every year.
d) 、 Never use petrol,benzese,thinner or any other such chemical for clearing the unit.
e) 、 Don't allow water or anything enter the motor.
f) 、 When power supply comes from socket, the plug must accord with IEC335-1.When the power cord is
connected with charging line directly, all polarity switches that the contact gap is 3mm at least must be installed
in the charging line.
YELLOW
THERMAL
CUT-OUT
BROWN
GREEN
C
ORANGE
(YELLOW)
RED
THERMAL
CUT-OUT
YELLOW
C
ORANGE
(YELLOW)
RED
THERMAL
CUT-OUT
YELLOW
C
ORANGE
(YELLOW)
RED