Panasonic DMC-fz7 Operating Instructions Manual page 99

[Windows]
The drive appears in the [My Computer]
folder.
• If you are connecting the camera to a PC
for the first time, the required driver is
installed automatically so that the camera
can be recognized by Windows Plug and
Play. The drive then appears on the
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
• The drive is displayed as [LUMIX] when
you connect the camera with no card
inserted.
• The drive is displayed as [NO_NAME] or
[Untitled] when you connect the camera
with a card inserted.
∫ Folder Composition
Folders are displayed as shown in the
following illustration.
≥SD Memory Card
≥MultiMediaCard
1 Folder number
2 File number
3 JPG: pictures
MOV: motion pictures
Downloaded From camera-usermanual.com Panasonic Manuals
The items in each folder are as follows.
DCIM
100_PANA to
999_PANA
MISC
PRIVATE1
• The data for up to 999 pictures recorded
by the camera can be included in 1 folder.
If the number of pictures exceeds 999,
another folder is created.
• To reset the file number or the folder
number, select [NO.RESET] in the
[SETUP] menu. (P23)
∫ Conditions under which a different
folder number is used
In the following cases, the picture is not
recorded in the same folder as the
DCIM
previously recorded picture. It is recorded
100_PANA
in a folder with a new number.
1 1 When the folder just recorded to contains
a picture file with the number 999 in it
100_PANA
(example: P1000999.JPG).
P1000001.JPG
2 When the card just recorded to contains,
2 3
for example, a folder with the number
P1000002.JPG
100 (100_PANA) in it and that card is
removed and replaced with a card that
P1000999.JPG
has a folder with the number 100 in it
101_PANA
recorded by a camera from a different
maker (100XXXXX, with XXXXX being
the name of the maker) and then a
999_PANA
picture is recorded.
MISC
3 When recording after selecting
PRIVATE1
[NO.RESET] (P23) from the [SETUP]
menu. (Pictures will be recorded to a
new folder with a number sequential to
the folder recorded to immediately
before. By using [NO.RESET] on a card
that does not contain folders or pictures,
such as one just formatted, the folder
number can be reset to 100.)
Connecting to other equipment
Folders from [100_PANA] to
[999_PANA]
Pictures/motion pictures
Files on which the DPOF
print settings are recorded
Pictures recorded in flip
animation function
99
VQT0V63