Panasonic DMC-fz7 Operating Instructions Manual page 115

• Is the camera recognized by the PC
• Set [USB MODE] to [PC]. (P23, 98)
5: The card is not recognized by the PC.
• Disconnect the USB connection cable.
6: The picture cannot be printed when
the camera is connected to a printer.
• Does the printer support PictBridge?
• Set [USB MODE] to [PictBridge (PTP)].
7: The ends of the pictures are cut at
printing.
• When using a printer with a trimming or
• When you order photo studios to print
8: The picture is not displayed fully on
the TV.
• Set the aspect of the TV on the camera.
∫ Others
1: An unreadable language was selected
by mistake.
• Press [MENU/SET], select the [SETUP]
2: The camera will make sounds caused
by internal mechanical movement
when it is shaken.
• The sound arises when the lens moves.
3: The setting for the auto review
function is disabled.
Downloaded From camera-usermanual.com Panasonic Manuals
correctly?
Connect it again while the card is
inserted in the camera.
– You cannot print pictures with printers
which do not support PictBridge.
(P100)
(P23, 100)
borderless printing function, cancel this
function before printing. (For details,
refer to the operating instructions for the
printer.)
pictures, ask the photo studio if the
pictures can be printed with both ends.
(P24)
menu icon [ ] and then select the [
icon to set the desired language. (P24)
This is not a malfunction.
• Are you taking pictures using auto
bracket (P48)? Is the camera in burst
mode (P50) or motion picture mode
[ ] (P68)? Is [AUDIO REC.] set to
[ON] (P79)?
– In these cases, you cannot set the
auto review function in the [SETUP]
menu.
4: A red lamp sometimes turns on when
the shutter button is pressed halfway.
• In dark places, the AF assist lamp (P82)
lights red to make it easier to focus on a
subject.
5: The AF assist lamp does not turn on.
• Is [AF ASSIST LAMP] on the [REC]
mode menu set to [ON]? (P82)
• Are you taking pictures in dark places?
– The AF assist lamp does not turn on
in bright places.
• The AF assist lamp does not turn on
when [SCENERY] (P60),
[NIGHT SCENERY] (P61),
[FIREWORKS] (P63) or [PANNING]
(P61) in scene mode is selected.
6: The camera becomes warm.
• The surface of the camera may become
warm during use. This does not affect
the performance or quality of the
camera.
7: The lens clicks.
• When the brightness changes due to
zoom or camera movement etc., the
lens may click and the picture on the
screen may drastically change.
]
However, the picture is not affected.
The sound is caused by the automatic
adjustment of the aperture.
This is not a malfunction.
Others
115
VQT0V63