Akai KS800-BT Instruction Manual page 13

CD OR CD+G / MP3+G OPERATION
PLAY/PAUSE
1. To start playing, press the PLAY/PAUSE button once, the currently track number and
PLAY indicator will appear on the screen.
2. To temporarily stop playing, press the PLAY/PAUSE button, the PAUSE indicator will be
shown on the screen.
3. To resume play, press the PLAY/PAUSE button again, the PLAY indicator will be shown on
the screen.
NOTE: - Pressing pause when a CD+G/MP3+G is playing may cause distorted lyrics
on the screen, any distortion will remain until the whole screen is
refreshed during an instrumental break or you stop the song and start it
from the beginning
- Never place anything except a compact disc on the disc compartment.
Foreign objects can damage the unit.
- Do not apply excessive force to disc cover.
- Only place one disc on the disc compartment at a time.
- Do not open the disc cover of the CD compartment while it's playing.
STOP
If the STOP button is pressed in the course of playing, the disc will cease to play.
SKIP PLAY (For both CD and CD+G/MP3+G discs)
In stop or playback mode, you can skip up or down to a specific track by
pressing the forward or back SKIP Button.
ENTER A TRACK NUMBER TO PLAYBACK
1. Press the TRACK button once, the track number and total track number will be
displayed. The track number will be blinking for user selection.
2. Press the SKIP
tracks is less than 10)
3. If there are 10 or more tracks on the media, the first digit of track number will be
blinking.
4. Press the SKIP
5. Then, press TRACK button again to advance to second or third digit.
6. Press the SKIP
7. Press the PLAY/PAUSE button when you have selected the desired track to
play.
SEARCH (For CD disc /MP3 disc only)
When playing a CD disc or MP3 disc, you can press and hold the SKIP
buttons ( or
search at high speed in the forward or reverse direction. By releasing the
button, normal play will be resumed.
or SKIP button to select a desired track.(if the number of
or
SKIP button to adjust the first digit.
or
SKIP button to adjust the second or the third digit.
) to locate a specific point on a track. The system will
EN - 12