G E T T I N G S T A R T E D
9403 ™ printer prints text, graphics, and bar codes on thermal
®
The Monarch
transfer (ribbon) or thermal direct supplies. The 9403 printer prints labels
continuously (in one strip).
This chapter includes information about
unpacking the printer.
connecting the power cable.
connecting the communications cable.
using the printer's control panel.
S t a n d a r d F e a t u r e s
The following features are standard on the 9403 printer:
203 dots per inch (DPI) printhead
2-inch by 6-inch print image
21-key keypad
2 inches per second maximum print speed
baud rate up to 19200
formats, graphics, and check digits saved in Flash memory when printer is turned off
(version 2.0 or greater)
1
Getting Started 1-1