Akai KS878-BT Instruction Manual page 16

Bluetooth pedestal karaoke system with 6 speakers and light effects
Table of Contents

Advertisement

USB OPERATION
PROGRAMMING USB PLAYBACK
This unit can be programmed to play up to 20 files in USB mode. Plug the USB flash
drive and select USB mode. (without pressing the PLAY/PAUSE button).
1) Press PROGRAM/REPEAT button once in stop mode. "PRG SET 01:XXX" will be shown
on the screen.
2) Press the SKIP or PAGE +/ - buttons to select the desired track to be programmed.
3) Press PROGRAM/REPEAT button again to save the selected track/files.
4) Repeat steps 2–3 to program up to 20 tracks/file.
5) Press the PLAY/PAUSE button to play the programmed tracks after programming is
completed. The "PROG" indicator will appear on screen during the programmed
playback.
6) To clear program and resume normal playback, press the STOP button twice during
playback to clear the programmed tracks.
REMARK:
The unit can store up to 20 tracks/files in the programmable memories. During the
programmed playback, user can still select the "repeat one/repeat all" function.
RECORDING IN USB 1
You can record your performance in different modes:
1. CDG mode - record CDG track with microphone voice & external input as MP3G.
record CD or MP3 CD track with microphone voice & external input as MP3.
2. USB 2 mode - record MP3G or MP3 with microphone voice & external input as MP3
3. Bluetooth or Line-in mode - record music with microphone voice & external input as MP3
All recording files are stored in USB 1 flash drive under a folder named "REC". The following
are the procedures for recording.
Plug a USB flash drive into USB 1 socket.
Press FUNCTION button to toggle to mode you want to record - CDG/ USB2/ Bluetooth/
Line-in mode. Make sure that the corresponding music content is ready.
Locate the desired track or file to play by pressing the
Press PLAY button to start (follow specific section to play music in different mode).
Press
RECORD button to start recording together with your voice and external input.
(The percentage of completion will be displayed.)
Press
RECORD button again to stop recording.
To playback the recording, it is the same as playing back MP3 or MP3+G
file inside the
USB 1 flash drive, please follow instructions in USB OPERATION.
SKIP
EN - 15
or
SKIP
button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents