Other Connections; Headphones; Front Av Connections; Hdmi Input - Panasonic TX-27LWD500A Operating Instructions Manual

Other Connections

Headphones & Front AV inputs
AV3 INPUT S-VIDEO VIDEO

HDMI input

This television is able to be connected to HDMI equipment. Connect using the special HDMI cable (not supplied)
and set the AV audio to HDMI. Please refer to page 14.

VCR Out*

The VCR output is a set of RCA connectors on the IRD block (where the antenna is plugged in). The aspect ratio on
this video output (yellow connector) is adjustable. You can also get digital audio from the IRD block. There is an
optical cable connector on the side of the block. You can decide what form the digital audio will take. Please refer to
page14.
Amplifier Connect*
For a full Home Theatre sound experience, an external Dolby Digital decoder and a multi-channel amplifier must be
connected to the DIGITAL AUDIO OUT terminal on the TV.
Unauthorised recording of material from Television Broadcasts or from other video
26
L AUDI O R
Headphones can be used to listen in private and not disturb other
people in the house. Use stereo headphones (Not included) with
3.5mm Plug.
When a headphone plug is inserted into the headphone socket the
internal speakers will not operate.
Please refer to page 13 for headphone volume adjustment. The
normal television sound controls (volume, bass, treble, balance,
sound mode and ambience) have no effect on the headphone
sound.
VCRs, cameras, games and other video sources can be connected
to the television through the front AV input terminals.
The front panels are particularly useful for temporary connections.
For permanent connections we recommend that you use the rear
inputs.
and/or audio sources may contravene copyright laws.
* WARNING
Panasonic
AV 3 INPUT S- VIDEO VIDEO L AUD IO R