Auto Setup; Using The On-Screen Displays - Panasonic TX-27LWD500A Operating Instructions Manual

Plug the television into the mains and switch it on.
Unless your dealer has already programmed the television
for your state or territory, you will have to perform an Auto
Setup.
Use the UP or DOWN buttons to select the state or
territory in which you live.
Press the OK button to start the Auto Setup.
AUTO SETUP IN PROGRESS
SEARCHING
PLEASE WAIT
This TV has a comprehensive system of On-Screen Display (OSD) menus to access adjustments and options
Picture Menu
Sound Menu
Setup Menu
Some selections, for example, Contrast, Brightness, Colour and Sharpness will allow you to increase or decrease
their level.
Some selections, for example, Power On Preference, allow a change of setting to be made.
Some selections, for example, Tuning Menu, will lead to a further menu.
The OK button is used in some menus to store settings after adjustments have been made or options have been
set: for example DVB System Setup.
The MENU button will take you back to the previous menu. The EXIT button is used to exit the menu system and
return to the normal viewing screen.
The television will search for the digital and analogue
stations simultaneously. TV stations will be located and
stored ready for use.
05 DVB channels are stored into logical channel numbers.
Analogue stations are stored in the order in which they
are found. The programme order depends on the TV
signal, the broadcasting system and reception conditions.

Using the On-Screen Displays

Getting Started

Auto Setup

11