Adding Other Effects - Kawai CN 31 Owner's Manual

Page
18

ADDING OTHER EFFECTS

Chorus is an effect that simulates the rich character of a vocal choir or string ensemble, enriching the original
voice by over-layering a slightly detuned version of the sound.
Delay is an effect that adds echoes to the sound. There are three types of delay available (delay 1, delay 2 and
delay 3), each with a different length of delay between the echoes.
This is a vibrato type effect.
2
This effect simulates the sound of the Rotary Speaker cabinet commonly used with electronic organs. Rotary
1 is normal rotary and Rotary 2 is with distortion effect. The soft pedal is used to change the speed of the rotor
between SLOW and FAST.
Step1
Press the EFFECTS button.
The LED indicator will turn on to indicate that the effect is in use. Press and hold the EFFECTS button to show
the currently selected effect in the display.
Step2
To change the effect type, press and hold the EFFECTS button and press the VALUE buttons.
To turn off the effects, press the EFFECTS button again.
Press the EFFECTS button once again to turn the effects back on. The previously selected effect type will be
used.
Any changes made to the effect type or on / off status will remain until the power is turned off.
When the power is turned off the effect settings will return to the default settings.
Downloaded from www.Manualslib.com
CHORUS
DELAY
TREMOLO
ROTARY
Hold down the button.
manuals search engine
Chorus Delay 1
Rotary 2
Delay 2 Delay 3
Rotary 1 Tremolo